产品中心
PB-80/420-2P High-Capacity Power Surge Protector
所属分类:
PB Series
● Specifically designed to protect voltage electrical equipment from surge hazards caused by switching operations, lightning strikes, and electromagnetic pulses. ● Meticulously manufactured using high-energy varistor components and advanced lightning protection technology. Installed in distribution panels of 220V/380V low-voltage power supply systems for secondary overvoltage protection, with a maximum discharge current (8/20 μs) of up to 80 kA.
线制:
标称放电电流In:
40 kA
适用电压:
连接方式:
Plug-in
防爆:
遥信功能 :
There is
适用配电系统 :

- 产品对比
去对比
Basic Parameters |
|
| Lightning Protection Category | T2 |
| Rated operating voltage Un (AC) | 220V/380V |
| Maximum Continuous Operating Voltage UC(AC) | 420V |
| Nominal discharge current IN (8/20 µs) | 40KA |
| Maximum discharge current Imax (8/20 µs) | 80KA |
| Voltage Protection Level UP | ≤2.5 kV |
| Front-mounted fuse or circuit breaker | 100A |
| Response time tA | 25ns |
| Remote signaling interface | 250VAC/0.5A |
| Applicable | Second-level overvoltage protection for low-voltage distribution systems |
Size |
|
| Depth | 90mm |
| Height | 58mm |
| Width | 18mm |
Housing |
|
| Materials | Flame-retardant PBT |
| Protection Level | IP20 |
| Flame-retardant rating | PA66/V0 |
| Color | Red |
Standards/Procedures |
|
| Suitable for power systems | IT, TN-S, TN-C-S |
| Test standards are met. | GB/T 18802.21-2016/IEC 61643-21:2012 |
| Lightning Protection Performance Testing | Beijing Lightning Protection Facility Inspection Service Center |
Operating Environment |
|
| Continuous operating temperature | -20℃~+60℃ |
| Storage temperature | -40℃~+80℃ |
| Relative humidity | 10%~90% |
| Environmental Requirements | The surrounding environment shall be free from severe vibration, impact, and electromagnetic interference such as high currents and sparks. The air shall not contain any corrosive media that can attack chromium, nickel, or silver platings, nor shall it contain flammable or explosive substances. |
Connection Parameters |
|
| Wire cross-sectional area range | 6~16 mm² |
| Wire stripping length | 8mm |
| Thread | M3 |
| Connection method | Screw connection |
| Minimum Tightening Torque | 0.5 Nm |
| Maximum Tightening Torque | 0.6 Nm |
Install |
|
| Installation Method | DIN 35 mm rail mounting |
文件名称
文件大小
所属分类
上传时间
预览下载
312.3KB
Surge protector
2023-09-04
文件名称
所属分类
下载