产品中心
DV-412-T Thermoresistance Input/Thermoresistance Dual-Output Isolator (One Input, Two Outputs)
所属分类:
Terminal Power Supply Series
● Single-input, dual-output thermoresistive signal isolator ● 24 V power supply; fully isolated three-port design—input, output, and power supply ● Isolates and converts field temperature signals such as PT100 into thermoresistive signals.
通道数:
One input, two outputs
输入:
PT100 (0-100°C),PT100 (0-200°C),CU50 (0–100°C),CU50 (0–150°C),User-specific parameters,PT100 (0-400℃)
配电:
输出:
PT100 (0-100°C),PT100 (0-200°C),PT100 (0-400°C),PT100 (0-500°C),User-specific parameters
供电方式:
24 VDC

- 产品对比
去对比
Basic Parameters |
|
| Number of channels | 1 in, 2 out |
| Output accuracy (20°C) | 0.2% F.S. |
| Temperature drift | 50ppm/K |
| Response time | <0.5s (0–90%) (TYP) |
| Dielectric strength | 1500V AC/1min, 2mA |
| Insulation resistance | Greater than 100 MΩ at 500 VDC |
| Long-term compensation | 200Ω (line resistance) |
| Electromagnetic Compatibility | Complies with GB/T 18268 (IEC 61326-1) |
| Weight | Approximately 160 grams |
| Connected field devices | Two-wire resistance thermometer; three-wire resistance thermometer |
Input data |
|
| Input signal | PT100, PT1000, CU50 |
Output data |
|
| Output signal | PT100, PT1000, CU50 |
Power supply |
|
| Supply voltage (Ue) | 24 VDC ±25% |
| Power Protection | Reverse Power Protection |
| Power consumption | <2W |
| Power Supply Method | Independent power supply |
| Power Connection Method | Terminal power supply |
Size |
|
| Depth | 110mm |
| Height | 108mm |
| Width | 13.3mm |
Housing |
|
| Materials | PC+ABS flame retardant |
| Protection Level | IP20 |
| Flame-retardant rating | UL94/V0 |
| Color | Gray |
EMC data |
|
| Electrical Fast Transient/Burst Immunity | Standards: IEC 61326-1; Class A |
| Surge (Impulse) Immunity | Standards: IEC 61326-1; Class B |
| Radio-frequency electromagnetic field radiation immunity | Standards: IEC 61326-1; Compliance with Essential Requirements |
| Electrostatic Discharge Immunity | Standards: IEC 61326-1; Class A |
| Immunity to Conducted Disturbances Induced by Radio-Frequency Fields | Standards: IEC 61326-1; Compliance with Essential Requirements |
| Low-Frequency Common-Mode Conduction | Standards: IEC 61326-1; Compliance with Essential Requirements |
Operating Environment |
|
| Continuous operating temperature | -20℃~+60℃ |
| Storage temperature | -40℃ to +80℃ |
| Relative humidity | <90% RH (no condensation) |
| Environmental Requirements | The surrounding environment shall be free from severe vibration, impact, and electromagnetic interference such as high currents and sparks. The air shall not contain any corrosive media that can attack chromium, nickel, or silver plating, nor shall it contain flammable or explosive substances. |
Connection Parameters |
|
| Wire cross-sectional area range | 0.5~2.5 mm² |
| Minimum Wire Cross-Sectional Area AWG | 12 |
| Maximum Conductor Cross-Sectional Area AWG | 24 |
| Wire stripping length | 8mm |
| Thread | M3 |
| Connection method | Screw connection |
| Minimum Tightening Torque | 0.5 Nm |
| Maximum Tightening Torque | 0.6 Nm |
Install |
|
| Installation Method | DIN 35 mm rail mounting |
| External dimensions | |||
![]() |
Basic Parameters |
|
| Number of channels | 1 in, 2 out |
| Output accuracy (20°C) | 0.2% F.S. |
| Temperature drift | 50ppm/K |
| Response time | <0.5s (0–90%) (TYP) |
| Dielectric strength | 1500V AC/1min, 2mA |
| Insulation resistance | Greater than 100 MΩ at 500 VDC |
| Long-term compensation | 200Ω (line resistance) |
| Electromagnetic Compatibility | Complies with GB/T 18268 (IEC 61326-1) |
| Weight | Approximately 160 grams |
| Connected field devices | Two-wire resistance thermometer; three-wire resistance thermometer |
Input data |
|
| Input signal | PT100, PT1000, CU50 |
Output data |
|
| Output signal | PT100, PT1000, CU50 |
Power supply |
|
| Supply voltage (Ue) | 24 VDC ±25% |
| Power Protection | Reverse Power Protection |
| Power consumption | <2W |
| Power Supply Method | Independent power supply |
| Power Connection Method | Terminal power supply |
Size |
|
| Depth | 110mm |
| Height | 108mm |
| Width | 13.3mm |
Housing |
|
| Materials | PC+ABS flame retardant |
| Protection Level | IP20 |
| Flame-retardant rating | UL94/V0 |
| Color | Gray |
EMC data |
|
| Electrical Fast Transient/Burst Immunity | Standards: IEC 61326-1; Class A |
| Surge (Impulse) Immunity | Standards: IEC 61326-1; Class B |
| Radio-frequency electromagnetic field radiation immunity | Standards: IEC 61326-1; Compliance with Essential Requirements |
| Electrostatic Discharge Immunity | Standards: IEC 61326-1; Class A |
| Immunity to Conducted Disturbances Induced by Radio-Frequency Fields | Standards: IEC 61326-1; Compliance with Essential Requirements |
| Low-Frequency Common-Mode Conduction | Standards: IEC 61326-1; Compliance with Essential Requirements |
Operating Environment |
|
| Continuous operating temperature | -20℃~+60℃ |
| Storage temperature | -40℃ to +80℃ |
| Relative humidity | <90% RH (no condensation) |
| Environmental Requirements | The surrounding environment shall be free from severe vibration, impact, and electromagnetic interference such as high currents and sparks. The air shall not contain any corrosive media that can attack chromium, nickel, or silver plating, nor shall it contain flammable or explosive substances. |
Connection Parameters |
|
| Wire cross-sectional area range | 0.5~2.5 mm² |
| Minimum Wire Cross-Sectional Area AWG | 12 |
| Maximum Conductor Cross-Sectional Area AWG | 24 |
| Wire stripping length | 8mm |
| Thread | M3 |
| Connection method | Screw connection |
| Minimum Tightening Torque | 0.5 Nm |
| Maximum Tightening Torque | 0.6 Nm |
Install |
|
| Installation Method | DIN 35 mm rail mounting |
| External dimensions | |||
![]() |
文件名称
文件大小
所属分类
上传时间
预览下载
191.8KB
Signal isolator
2023-09-04
144.4KB
Signal isolator
2023-09-19
文件名称
所属分类
下载
