产品中心
DA-04 Passive AC Signal Isolator
所属分类:
Base Centralized Power Supply Series
● Self-powered, harvesting a small amount of energy from the input signal ● Input and output channels feature reverse-polarity protection ● DIN rail mounting with pluggable terminals ● 0–5 A AC / 4–20 mA (one input, one output)
通道数:
One in, one out
输入:
0~5 VAC,User-specific parameters,0-10 VAC,0-100VAC,0-1AAC,0-5AAC,0-10 AAC
配电:
输出:
4~20mA
供电方式:
Loop Power Supply
产品详情
技术参数
技术与安装
下载

Close
- 产品对比
去对比
Basic Parameters |
|
| Number of channels | 1 in, 1 out |
| Output accuracy (20°C) | 0.2% F.S. |
| Temperature drift | 50ppm/K |
| Response time | <0.15s (0–90%) (TYP) |
| Dielectric strength | 1500 VAC for 1 minute, 2 mA |
| Insulation resistance | Greater than 100 MΩ at 500 VDC |
| Electromagnetic Compatibility | Complies with GB/T 18268 (IEC 61326-1) |
| Weight | About 70 grams |
| Connected field devices | CT; PT |
Input data |
|
| Input signal | 0~10 VAC; 0~256 VAC; 0~10 A AC |
| Input impedance | Voltage type ≥100 kΩ, current type ≤2 Ω |
Output data |
|
| Output signal | Two-wire 4–20 mA output |
| Output impedance | 0–500 Ω (when the port is powered by a 24 V supply) |
Size |
|
Base Power Supply |
|
| Depth | 121mm |
| Height | 113mm |
| Width | 13.3mm |
Terminal power supply |
|
| Depth | 110mm |
| Height | 108mm |
| Width | 13.3mm |
Housing |
|
| Materials | PC+ABS flame retardant |
| Protection Level | IP20 |
| Flame-retardant rating | UL94/V0 |
| Color | White + Gray |
EMC data |
|
| Electrical Fast Transient/Burst Immunity | Standards: IEC 61326-1; Class A |
| Surge (Impulse) Immunity | Standards: IEC 61326-1; Class B |
| Radio-frequency electromagnetic field radiation immunity | Standards: IEC 61326-1; Compliance with Essential Requirements |
| Electrostatic Discharge Immunity | Standards: IEC 61326-1; Class A |
| Immunity to Conducted Disturbances Induced by Radio-Frequency Fields | Standards: IEC 61326-1; Compliance with Essential Requirements |
| Low-Frequency Common-Mode Conduction | Standards: IEC 61326-1; Compliance with Essential Requirements |
Operating Environment |
|
| Continuous operating temperature | -20℃~+60℃ |
| Storage temperature | -40℃ to +80℃ |
| Relative humidity | <90% RH (no condensation) |
| Environmental Requirements | The surrounding environment shall be free from severe vibration, impact, and electromagnetic interference such as high currents and sparks. The air shall not contain any corrosive media that can attack chromium, nickel, or silver platings, nor shall it contain flammable or explosive substances. |
Connection Parameters |
|
| Wire cross-sectional area range | 0.5~2.5 mm² |
| Minimum Wire Cross-Sectional Area AWG | 12 |
| Maximum Conductor Cross-Sectional Area AWG | 24 |
| Wire stripping length | 8mm |
| Thread | M3 |
| Connection method | Screw connection |
| Minimum Tightening Torque | 0.5 Nm |
| Maximum Tightening Torque | 0.6 Nm |
Install |
|
| Installation Method | DIN 35 mm rail mounting |
| External dimensions | |||
![]() |
|||
| Installation Method | |||
![]() |
![]() |
![]() |
![]() |
Basic Parameters |
|
| Number of channels | 1 in, 1 out |
| Output accuracy (20°C) | 0.2% F.S. |
| Temperature drift | 50ppm/K |
| Response time | <0.15s (0–90%) (TYP) |
| Dielectric strength | 1500 VAC for 1 minute, 2 mA |
| Insulation resistance | Greater than 100 MΩ at 500 VDC |
| Electromagnetic Compatibility | Complies with GB/T 18268 (IEC 61326-1) |
| Weight | About 70 grams |
| Connected field devices | CT; PT |
Input data |
|
| Input signal | 0~10 VAC; 0~256 VAC; 0~10 A AC |
| Input impedance | Voltage type ≥100 kΩ, current type ≤2 Ω |
Output data |
|
| Output signal | Two-wire 4–20 mA output |
| Output impedance | 0–500 Ω (when the port is powered by a 24 V supply) |
Size |
|
Base Power Supply |
|
| Depth | 121mm |
| Height | 113mm |
| Width | 13.3mm |
Terminal power supply |
|
| Depth | 110mm |
| Height | 108mm |
| Width | 13.3mm |
Housing |
|
| Materials | PC+ABS flame retardant |
| Protection Level | IP20 |
| Flame-retardant rating | UL94/V0 |
| Color | White + Gray |
EMC data |
|
| Electrical Fast Transient/Burst Immunity | Standards: IEC 61326-1; Class A |
| Surge (Impulse) Immunity | Standards: IEC 61326-1; Class B |
| Radio-frequency electromagnetic field radiation immunity | Standards: IEC 61326-1; Compliance with Essential Requirements |
| Electrostatic Discharge Immunity | Standards: IEC 61326-1; Class A |
| Immunity to Conducted Disturbances Induced by Radio-Frequency Fields | Standards: IEC 61326-1; Compliance with Essential Requirements |
| Low-Frequency Common-Mode Conduction | Standards: IEC 61326-1; Compliance with Essential Requirements |
Operating Environment |
|
| Continuous operating temperature | -20℃~+60℃ |
| Storage temperature | -40℃ to +80℃ |
| Relative humidity | <90% RH (no condensation) |
| Environmental Requirements | The surrounding environment shall be free from severe vibration, impact, and electromagnetic interference such as high currents and sparks. The air shall not contain any corrosive media that can attack chromium, nickel, or silver platings, nor shall it contain flammable or explosive substances. |
Connection Parameters |
|
| Wire cross-sectional area range | 0.5~2.5 mm² |
| Minimum Wire Cross-Sectional Area AWG | 12 |
| Maximum Conductor Cross-Sectional Area AWG | 24 |
| Wire stripping length | 8mm |
| Thread | M3 |
| Connection method | Screw connection |
| Minimum Tightening Torque | 0.5 Nm |
| Maximum Tightening Torque | 0.6 Nm |
Install |
|
| Installation Method | DIN 35 mm rail mounting |
| External dimensions | |||
![]() |
|||
| Installation Method | |||
![]() |
![]() |
![]() |
![]() |
文件名称
文件大小
所属分类
上传时间
预览下载
208.8KB
Signal isolator
2023-09-19
文件名称
所属分类
下载




