产品中心
DG-113 Signal Distributor, Compatible with Two-, Three-, and Four-Wire Systems (One Input, Three Outputs)
所属分类:
Base Centralized Power Supply Series
» Power indicator; » Easy connectivity, low power consumption, and long service life; » Complete isolation between input, output, power supply, and channels; » Centralized power supply via the base, with hot-swappable support; » Compact form factor, with a thickness of only 18.3 mm; » DIN rail mounting, with plug-in terminals.
通道数:
One in, three out
输入:
0~10mA,0-20 mA,4~20mA,0~5V,1-5V,0~10V,User-specific parameters
配电:
输出:
0~20mA,0/4–20 mA (passive),4~20mA,4–20 mA (load ≤ 500 Ω),User-specific parameters,0-5V,0~10V,1-5V
供电方式:
24 VDC

- 产品对比
去对比
| Basic Parameters | |
| Number of channels | 1 input, 3 outputs |
| Output accuracy (20°C) | 0.1% F.S. |
| Temperature drift | 50ppm/K |
| Response time | ≤0.05s (0–90%) (TYP) |
| Dielectric strength | 1500V AC/1min, 2mA |
| Insulation resistance | Greater than 100 MΩ at 500 VDC |
| Electromagnetic Compatibility | Complies with GB/T 18268 (IEC 61326-1) |
| Weight | About 200 grams |
| Connected field devices | Two-wire transmitters, three-wire transmitters; current source |
| Input data | |
| Input signal | 0~10V; 0~20mA |
| Input impedance | Voltage type: ≥100 kΩ; Current type: ≤100 Ω |
| Output data | |
| Output signal | 0~10V; 0~20mA |
| Output impedance | Voltage type ≥10 kΩ; current type ≤350 Ω |
| Power supply | |
| Supply voltage (Ue) | 24 VDC ±25% |
| Power Protection | Reverse Power Protection |
| Power consumption | <2W |
| Power Supply Method | Independent power supply |
| Power Connection Method | Terminal power supply; base power supply |
| Size | |
| Base Power Supply | |
| Depth | 121mm |
| Height | 113mm |
| Width | 18.3mm |
| Terminal power supply | |
| Depth | 110mm |
| Height | 108mm |
| Width | 18.3mm |
| Housing | |
| Materials | PC+ABS flame retardant |
| Protection Level | IP20 |
| Flame-retardant rating | UL94/V0 |
| Color | White + Gray |
| EMC data | |
| Electrical Fast Transient/Burst Immunity | Standards: IEC 61326-1; Class A |
| Surge (Impulse) Immunity | Standards: IEC 61326-1; Class B |
| Radio-frequency electromagnetic field radiation immunity | Standards: IEC 61326-1; Compliance with Essential Requirements |
| Electrostatic Discharge Immunity | Standards: IEC 61326-1; Class A |
| Immunity to Conducted Disturbances Induced by Radio-Frequency Fields | Standards: IEC 61326-1; Compliance with Essential Requirements |
| Low-Frequency Common-Mode Conduction | Standards: IEC 61326-1; Compliance with Essential Requirements |
| Operating Environment | |
| Continuous operating temperature | -20℃~+60℃ |
| Storage temperature | -40℃ to +80℃ |
| Relative humidity | <90% RH (no condensation) |
| Environmental Requirements | The surrounding environment shall be free from severe vibration, impact, and electromagnetic interference such as high currents and sparks. The air shall not contain any corrosive media that can attack chromium, nickel, or silver plating, nor shall it contain flammable or explosive substances. |
| Connection Parameters | |
| Wire cross-sectional area range | 0.5~2.5 mm² |
| Minimum Wire Cross-Sectional Area AWG | 12 |
| Maximum Conductor Cross-Sectional Area AWG | 24 |
| Wire stripping length | 8mm |
| Thread | M3 |
| Connection method | Screw connection |
| Minimum Tightening Torque | 0.5 Nm |
| Maximum Tightening Torque | 0.6 Nm |
| Install | |
| Installation Method | DIN 35 mm rail mounting |
| External dimensions | |||
![]() |
|||
| Installation Method | |||
![]() |
![]() |
![]() |
![]() |
| Basic Parameters | |
| Number of channels | 1 input, 3 outputs |
| Output accuracy (20°C) | 0.1% F.S. |
| Temperature drift | 50ppm/K |
| Response time | ≤0.05s (0–90%) (TYP) |
| Dielectric strength | 1500V AC/1min, 2mA |
| Insulation resistance | Greater than 100 MΩ at 500 VDC |
| Electromagnetic Compatibility | Complies with GB/T 18268 (IEC 61326-1) |
| Weight | About 200 grams |
| Connected field devices | Two-wire transmitters, three-wire transmitters; current source |
| Input data | |
| Input signal | 0~10V; 0~20mA |
| Input impedance | Voltage type: ≥100 kΩ; Current type: ≤100 Ω |
| Output data | |
| Output signal | 0~10V; 0~20mA |
| Output impedance | Voltage type ≥10 kΩ; current type ≤350 Ω |
| Power supply | |
| Supply voltage (Ue) | 24 VDC ±25% |
| Power Protection | Reverse Power Protection |
| Power consumption | <2W |
| Power Supply Method | Independent power supply |
| Power Connection Method | Terminal power supply; base power supply |
| Size | |
| Base Power Supply | |
| Depth | 121mm |
| Height | 113mm |
| Width | 18.3mm |
| Terminal power supply | |
| Depth | 110mm |
| Height | 108mm |
| Width | 18.3mm |
| Housing | |
| Materials | PC+ABS flame retardant |
| Protection Level | IP20 |
| Flame-retardant rating | UL94/V0 |
| Color | White + Gray |
| EMC data | |
| Electrical Fast Transient/Burst Immunity | Standards: IEC 61326-1; Class A |
| Surge (Impulse) Immunity | Standards: IEC 61326-1; Class B |
| Radio-frequency electromagnetic field radiation immunity | Standards: IEC 61326-1; Compliance with Essential Requirements |
| Electrostatic Discharge Immunity | Standards: IEC 61326-1; Class A |
| Immunity to Conducted Disturbances Induced by Radio-Frequency Fields | Standards: IEC 61326-1; Compliance with Essential Requirements |
| Low-Frequency Common-Mode Conduction | Standards: IEC 61326-1; Compliance with Essential Requirements |
| Operating Environment | |
| Continuous operating temperature | -20℃~+60℃ |
| Storage temperature | -40℃ to +80℃ |
| Relative humidity | <90% RH (no condensation) |
| Environmental Requirements | The surrounding environment shall be free from severe vibration, impact, and electromagnetic interference such as high currents and sparks. The air shall not contain any corrosive media that can attack chromium, nickel, or silver plating, nor shall it contain flammable or explosive substances. |
| Connection Parameters | |
| Wire cross-sectional area range | 0.5~2.5 mm² |
| Minimum Wire Cross-Sectional Area AWG | 12 |
| Maximum Conductor Cross-Sectional Area AWG | 24 |
| Wire stripping length | 8mm |
| Thread | M3 |
| Connection method | Screw connection |
| Minimum Tightening Torque | 0.5 Nm |
| Maximum Tightening Torque | 0.6 Nm |
| Install | |
| Installation Method | DIN 35 mm rail mounting |
| External dimensions | |||
![]() |
|||
| Installation Method | |||
![]() |
![]() |
![]() |
![]() |
文件名称
文件大小
所属分类
上传时间
预览下载
148.9KB
Signal isolator
2025-05-23
208.8KB
Signal isolator
2023-09-19
文件名称
所属分类
下载




