PF-10 Weighing transmitter

Classification:

PF series

● Power supply indication; ● Input/output/power isolation; ● Two 35002 sensors can be carried at the same time.

Click to consult

Add to comparison

Product inquiry

Product Details Technical parameters Download

产品对比

Total X Clear all

Contrast

General
General
Number of channels	1input/1output
Output accuracy(20°C)	0.1%F.S.
Temperature drift	50ppm/K
Response time	<0.05s (0~90%) (TYP)
Dielectric strength	1500VAC/1min,2mA
Insulation resistance	≥100MΩ;500VDC
Electromagnetic compatibility	compliant with GB/T18268 (IEC61326-1)
Weight	About 90g
Input data
Input data
Input signal	0-100mV
Input impedance	Voltage type≥100KΩ
Frequency signal	5V,10V,12V
Frequency	≤110KHz
Output data
Output data
Output signal	-10V~+10V;0~20mA
Output impedance	Current type ≤ 500 Ω; Voltage type ≥ 10K Ω
Power supply
Power supply
Supply voltage(Ue)	24VDC±10%
Power protection	Reverse protection of power supply
Power consumption	<1W
Power supply mode	Independent power supply
Power connecting mode	Terminal power supply;Base power supply
Overall dimension
Overall dimension
height	121mm
width	113mm
Thickness	13.3mm
Housing
Housing
Material	ABSflame retardant
Degree of protection	IP20
Flammability rating	UL94/V0
Colour	white+grey
EMC data
EMC data
Electrical fast transient/burst immunity	compliant with:IEC 61326-1;A-leve
Surge immunity	compliant with:IEC 61326-1;B-leve
Radiated,radio-frequency,electromagnetic field immunity	compliant with:IEC 61326-1
Electrostatic discharge immunity	compliant with:IEC 61326-1;A-leve
mmunity to conducted disturbances, induced by radio-frequency fields	compliant with:IEC 61326-1
Immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz	compliant with:IEC 61326-1
Operating conditions
Operating conditions
Ambient temperature	-20ºC~+60ºC
Storage temperature	-40ºC~+80ºC
Relative humidity	<90% RH (no condensate)
Environmental requirements	The air should not contain any medium corrupting the coat of chrome,nickel and silver.Moreover,violent quiver and impact or any cause of electromagnetic induction (such as big current or spark,etc.)must be avoided when using
Connection data
Connection data
Conductor cross section solid range	0.5~2.5mm²
Conductor cross section AWG min	12
Conductor cross section AWG max	24
Stripping length	8mm
Screw thread	M3
Connection method	Screw connection
Tightening torque min	0.5 Nm
Tightening torque max	0.6 Nm
Installation
Installation
Installation method	DIN35mm