DRG-6002 Thermocouple/millivolt signal alarm setter

Classification:

DRG-6000 series

The thermocouple/millivolt signal alarm setter converts the on-site thermocouple/millivolt signal into a standard 4mA~20mADC current signal for isolation and transmission to the safety side Control two relay alarm outputs to the isolation barrier based on user set range, alarm point, alarm mode and other parameters.

Click to consult

Add to comparison

Product inquiry

Product Details Technical parameters Download

产品对比

Total X Clear all

Contrast

Basic parameters
Output accuracy（20°C）	0.2%F.S.
Temperature drift	50ppm/K
Response time	≤20ms
Dielectric Strength	1500V AC/1min,2mA
Insulation resistance	Above 100M Ω at 500VDC
Electromagnetic compatibility	Conform to GB/T18268 (IEC61326-1)
Weight	About 150 grams
Drive capability	250VAC/2A or 30VDC/2A
Load capacity	Resistance load
Connected on-site equipment	Thermocouple
Data in
Input signal	Thermocouple or millivolt signal
Input range	Thermocouple measurement range
Output data
Output signal	4mA~20mAdc
Output Load	0~500Ω
Power supply
Supply Voltage（Ue）	20V~35VDC
Power protection	Power reverse protection
Power consumption	About 2W
Power supply mode	Independent power supply
Power connection method	Terminal power supply, base power supply
Size
Depth	110mm
Height	108mm
Width	18.3mm
Housing
Material	PC+ABS flame retardant
Protection grade	IP20
Flame retardant grade	UL94/V0
Usage environment
Continuous operating temperature	‘-20℃~+60℃
Storage temperature	-40℃～＋80℃
Relative humidity	＜90% RH (No condensed water)
Environmental requirements	There should be no strong vibrations, impacts, high currents, sparks or other electromagnetic induction effects in the surrounding environment. The air should not contain media that corrode chromium, nickel, and silver coatings, and should not contain flammable or explosive substances
Install
Installation method	DIN35mm guide rail installation