产品中心
PASR-9000AS is suitable for monitoring emergency stop buttons and safety doors.
所属分类:
PASR-9000 Series
The PASR-9000AS is a safety relay designed for emergency-stop buttons and safety-door interlock switch inputs, featuring two normally open (NO) safety output contacts with momentary operation and two NO auxiliary output contacts with delayed disconnection. It supports single- or dual-channel operation, manual or automatic reset, and includes inter-channel short-circuit monitoring.
输入设备:
Emergency Stop Button/Safety Door
供电电压:
24V DC/AC
输出触点数:
2NO + 2NO(t)
复位方式:
Automatic / Manual Reset
触点切换容量:
5A

- 产品对比
去对比
| Basic Parameters | |
| Number of contacts | 2NO + 2NO(t) |
| Contact material | AgSnO2 |
| Contact Type | Forced orientation |
| Contact Fuse Protection | 10A gL/gG, NEOZED (normally open contact) |
| Make-up buffer time | Automatic reset: ≤ 300 ms; Manual reset: ≤ 150 ms |
| Release buffer time | Emergency stop operation: ≤ 30 ms |
| Emergency stop operation (delay contact): 0.1 s ~ 3s (factory default setting: 3s) | |
| Power failure: ≤ 100 ms | |
| Recovery time | Emergency stop operation: ≤ 30 ms (after delayed contact response) |
| Power failure: ≤ 100 ms | |
| Rated Insulation Voltage | 250V AC |
| Rated Impulse Voltage | 4000 V (1.2/50 μs) |
| Applicable | Emergency stop button, safety door |
| Input parameters | |
| Input | Emergency stop button, safety door |
| Input current | ≤10 mA (24 V DC power supply) |
| Wire resistance | ≤15Ω |
| Power supply | |
| Power supply voltage | 24VDC/AC |
| Current Loss | ≤ 130 mA (24 V DC) |
| Operating Environment | |
| Operating temperature | -20°C to +60°C |
| Storage temperature | -40°C to +85°C |
| Relative humidity | 10%~90% |
| Size | |
| Height | 114.5mm |
| Width | 99mm |
| Thickness | 22.5mm |
文件名称
文件大小
所属分类
上传时间
预览下载
275.4KB
Safety relay
2024-03-26
文件名称
所属分类
下载