产品中心

+
  • DRG-1601(1716175366195).png
  • DRG-2(1716170410321).png
  • DRG-3(1716170409987).png

DRG-1601-GJB Isolated Safety Barrier for Digital Input, 100% Made in China

img

所属分类:

100% domestically produced safety barrier

DRG Series

The discrete-input isolated safety barrier accepts contact or proximity-switch inputs from the hazardous-area side and, via barrier isolation, transmits these signals to the safe-area output. It features relay-output configuration for switching between normally open and normally closed states. All internal electronic components are domestically manufactured, achieving a 100% localization rate.

通道数:

One input, two outputs

输入:

配电:

输出:

供电方式:

电源连接方式 :

img
产品详情 技术参数 技术与安装 下载

Close
  • 产品对比
Total X Clear all

去对比

Basic Parameters
Number of channels 1 in, 2 out
On-site sensor-side supply voltage Approximately 8 V (open circuit)
Response time 20ms
Dielectric strength 1500 VAC for intrinsically safe terminals vs. non-intrinsically safe terminals; 1000 VAC for non-intrinsically safe terminals vs. non-intrinsically safe terminals.
Insulation resistance Non-intrinsically safe terminal–intrinsically safe terminal ≥ 100 MΩ; power supply–non-intrinsically safe terminal ≥ 100 MΩ.
Electromagnetic Compatibility Complies with IEC 61326-1 (GB/T 18268) and IEC 61326-3-1.
Explosion-proof marking [Ex ia Ga]ⅡC
Weight Approximately 150g
Connected field devices Field devices such as proximity switches and limit switches compliant with DIN 19234 and NAMUR
Applicable Locations Zone 0, Zone 1, Zone 2; IIA, IIB, IIC hazardous areas
Signal Input Characteristics When the on-site input current exceeds 2.1 mA, it indicates ON.
When the on-site input current exceeds 1.2 mA, it indicates OFF.
Switch hysteresis: 200 µs
Function of Switch Settings When in the ON state, the input and output are reversed, and a wiring fault detection function is provided.
In the OFF state, the input and output are in phase, and there is no circuit fault detection function.
Relay Response time: 20 ms
Output Characteristics Driving capability: 250 VAC/2 A, 30 VDC/2 A
Input data
Input signal Switch
Output data
Output signal Relay
Power supply
Power Supply 20~35V DC
Power Protection Reverse Power Protection
Power consumption 1.5W
Power Supply Method Independent power supply
Power Connection Method Base power supply; terminal power supply
Size
Centralized power supply
Depth 120.8mm
Height 113mm
Width 18.3mm
Independent power supply
Depth 110mm
Height 108mm
Width 18.3mm
Housing
Materials PC+ABS flame retardant
Protection Level IP20
Flame-retardant rating UL94/V0
Color White + Gray
EMC data
Electrical Fast Transient/Burst Immunity Standards: IEC 61326-1; Class A
Surge (Impulse) Immunity Standards: IEC 61326-1; Class B
Radio-frequency electromagnetic field radiation immunity Standards: IEC 61326-1; Compliance with Essential Requirements
Electrostatic Discharge Immunity Standards: IEC 61326-1; Class A
Immunity to Conducted Disturbances Induced by Radio-Frequency Fields Standards: IEC 61326-1; Compliance with Essential Requirements
Low-Frequency Common-Mode Conduction Standards: IEC 61326-1; Compliance with Essential Requirements
Operating Environment
Continuous operating temperature -20℃~+60℃
Storage temperature -40℃~+80℃
Relative humidity 10%~90%
Environmental Requirements The surrounding environment shall be free from severe vibration, impact, and electromagnetic interference such as high currents and sparks. The air shall not contain any corrosive media that can attack chromium, nickel, or silver platings, nor shall it contain flammable or explosive substances.
Connection Parameters
Wire cross-sectional area range 0.5~2.5 mm²
Minimum Wire Cross-Sectional Area AWG 24
Maximum Conductor Cross-Sectional Area AWG 12
Wire stripping length 8mm
Thread M3
Connection method Screw connection
Minimum Tightening Torque 0.5 Nm
Maximum Tightening Torque 0.6 Nm
Install
Installation Method DIN 35 mm rail mounting
External dimensions
Base-centralized power supply type Terminal-powered
Installation Method
Basic Parameters
Number of channels 1 in, 2 out
On-site sensor-side supply voltage Approximately 8 V (open circuit)
Response time 20ms
Dielectric strength 1500 VAC for intrinsically safe terminals vs. non-intrinsically safe terminals; 1000 VAC for non-intrinsically safe terminals vs. non-intrinsically safe terminals.
Insulation resistance Non-intrinsically safe terminal–intrinsically safe terminal ≥ 100 MΩ; power supply–non-intrinsically safe terminal ≥ 100 MΩ.
Electromagnetic Compatibility Complies with IEC 61326-1 (GB/T 18268) and IEC 61326-3-1.
Explosion-proof marking [Ex ia Ga]ⅡC
Weight Approximately 150g
Connected field devices Field devices such as proximity switches and limit switches compliant with DIN 19234 and NAMUR
Applicable Locations Zone 0, Zone 1, Zone 2; IIA, IIB, IIC hazardous areas
Signal Input Characteristics When the on-site input current exceeds 2.1 mA, it indicates ON.
When the on-site input current exceeds 1.2 mA, it indicates OFF.
Switch hysteresis: 200 µs
Function of Switch Settings When in the ON state, the input and output are reversed, and a wiring fault detection function is provided.
In the OFF state, the input and output are in phase, and there is no circuit fault detection function.
Relay Response time: 20 ms
Output Characteristics Driving capability: 250 VAC/2 A, 30 VDC/2 A
Input data
Input signal Switch
Output data
Output signal Relay
Power supply
Power Supply 20~35V DC
Power Protection Reverse Power Protection
Power consumption 1.5W
Power Supply Method Independent power supply
Power Connection Method Base power supply; terminal power supply
Size
Centralized power supply
Depth 120.8mm
Height 113mm
Width 18.3mm
Independent power supply
Depth 110mm
Height 108mm
Width 18.3mm
Housing
Materials PC+ABS flame retardant
Protection Level IP20
Flame-retardant rating UL94/V0
Color White + Gray
EMC data
Electrical Fast Transient/Burst Immunity Standards: IEC 61326-1; Class A
Surge (Impulse) Immunity Standards: IEC 61326-1; Class B
Radio-frequency electromagnetic field radiation immunity Standards: IEC 61326-1; Compliance with Essential Requirements
Electrostatic Discharge Immunity Standards: IEC 61326-1; Class A
Immunity to Conducted Disturbances Induced by Radio-Frequency Fields Standards: IEC 61326-1; Compliance with Essential Requirements
Low-Frequency Common-Mode Conduction Standards: IEC 61326-1; Compliance with Essential Requirements
Operating Environment
Continuous operating temperature -20℃~+60℃
Storage temperature -40℃~+80℃
Relative humidity 10%~90%
Environmental Requirements The surrounding environment shall be free from severe vibration, impact, and electromagnetic interference such as high currents and sparks. The air shall not contain any corrosive media that can attack chromium, nickel, or silver platings, nor shall it contain flammable or explosive substances.
Connection Parameters
Wire cross-sectional area range 0.5~2.5 mm²
Minimum Wire Cross-Sectional Area AWG 24
Maximum Conductor Cross-Sectional Area AWG 12
Wire stripping length 8mm
Thread M3
Connection method Screw connection
Minimum Tightening Torque 0.5 Nm
Maximum Tightening Torque 0.6 Nm
Install
Installation Method DIN 35 mm rail mounting
External dimensions
Base-centralized power supply type Terminal-powered
Installation Method