产品中心

+
  • PIA-540 .png

PIA-540 Series: Quad-core, 1.2 GHz high-performance rack-mounted embedded computer supporting two Ethernet ports, four serial ports, multiple DIO channels, and wireless communication via Wi-Fi, LoRa, and 4G, with SD card storage expansion.

img

所属分类:

PIA Series

» Industrial-grade quad-core processor with a 1.2 GHz clock speed » 1 GB DDR3 SDRAM, 8 GB Flash storage » Two 100 Mbps/1 Gbps industrial Ethernet interfaces » Four RS232/485 serial interfaces » Supports two digital inputs (DI) and one digital output (DO) » Supports local wireless communication via Wi-Fi and LoRa » Supports 4G remote communication » Built-in SD card expansion slot » Built-in real-time clock (RTC) and buzzer » Built-in temperature sensor and hardware encryption » Supports SMA-K dual-antenna interface » Built-in temperature sensor ensures system reliability » Pre-installed embedded Linux operating system » Supports industrial-grade wide-temperature operation from -40°C to 80°C

产品详情 订购信息 下载
Software Specifications
Operating System Linux 3.12
Protocol stack TCP, UDP, IPv4, ICMP, ARP, HTTP,
CHAP, PAP, DHCP, NTP, NFS,
Telnet, FTP, TFTP, PPP, PPPoE
Cybersecurity Iptables firewall
Communication Protocol • Complete TCP/IP protocol stack
• Modbus communication protocol
Hardware Specifications
Main System
CPU Industrial-grade quad-core embedded microprocessor, 1.2 GHz
RAM 1GB DDR3 SDRAM
Flash 256MB Flash
Storage Expansion Supports SD card storage expansion, up to 32 GB.
Network interface
Number of channels 1 100 Mbps, 1 1 Gbps
Rate 100/1000 Mbps adaptive, RJ45
Isolation protection 15 kV air discharge and 8 kV contact discharge protection
Serial interface
Number of channels 4 items
Standard RS232 (TxD, RxD, GND)
RS485 (A, B, GND)
Baud rate 300 bps to 230.4 kbps
Serial Port Protection All signal lines are protected against 15 kV ESD.
Flow Control RS485 Automatic Data Flow Control
Interface Type RJ45
Digital Input
Number of channels 2 items
Dry node Logic 0 (shorted to GND), Logic 1 (open)
Wet node Logic 0 (below 3 VDC), Logic 1 (10–30 VDC)
Protection 4 kV opto-isolation, 36 VDC overvoltage protection
Digital Output
Number of channels 1 item
Relay Optocoupler relay, contactless, rating: 1 A @ 60 VAC or 1 A @ 60 VDC
Wi-Fi
Antenna 1 SMA-K antenna
Compatibility Standards 802.11a/b/g
Radio Frequency Type DSSS, CCK, OFDM
Transmission rate 150Mbps
Transmission distance 200 meters (open, unobstructed area)
LED indicator
System Power supply, operation
Serial port TXD/RXD
Network ACT/LINK (located on the RJ45 connector)
Button
Function Supports “Reset to Factory Defaults”
LoRa
Antenna 1 SMA-K antenna
Frequency range 433/868/915MHz
Sensitivity -140Bm
Transmit Power 5 to 30 dBm
Transmission rate Up to 5.5 Kbps
Transmission distance 3 km to 10 km
4G (Seven-band All-Network Compatibility)
Antenna 1 SMA-K antenna
SIM card 1 SIM card slot
Technical system Four-band TDD-LTE, three-band FDD-LTE
Peak rate 100 Mbps (downstream), 50 Mbps (upstream)
Real-Time Clock
Real-Time Clock RTC with Built-in Backup Lithium Battery
Mechanical Properties
Housing material Aluminum-magnesium alloy, vertical design
Weight 900g
Size 55×105×135 mm
Installation Method Rail mounting or wall mounting
Work environment
Operating temperature -40 to 80 ℃
Storage temperature -50 to 90°C
Operating humidity 5–95% RH, non-condensing
Seismic performance 1G at IEC-68-2-6, sine wave, 5–500 Hz, 1 octave/min, 1 hour per axis.
Impact resistance 5G @ IEC-68-2-27, half-sine wave, 30 ms
Power Requirements
Power Input 9 to 60 VDC; 12 VDC is recommended.
System Power Consumption Less than 5W
Reliability
Alarm tool Built-in buzzer
Temperature Monitoring Built-in temperature sensor for temperature monitoring.
Watchdog Hardware Watchdog (WDT) Monitoring
Mean Time Between Failures Greater than 500,000 hours
Warranty period 1 year
Security
Hardware Encryption Built-in independent hardware encryption circuitry to protect user IP.
Close
  • 产品对比
Total X Clear all

去对比

文件名称

文件大小

所属分类

上传时间

预览下载