产品中心

+
  • PIA-540 .png

PWK-3100 Series IEEE 802.11 b/g/n Industrial-grade Single-band Single-channel Wireless AP/Bridge/Client, with 4 LAN ports, 1 WAN port, 1 serial port, 2 DI inputs, and 1 DO output.

img

所属分类:

PWK Series

» Supports IEEE 802.11 b/g/n standards » Four 10/100 Mbps adaptive LAN ports » One 10/100 Mbps adaptive WAN port » One opto-isolated RS232/485 serial port » Two DI inputs and one DO output » Supports QoS and VLAN for efficient network communication » Supports data transmission rates of up to 300 Mbps » MIMO technology enhances data throughput and signal coverage » Supports dual redundant power inputs » Supports SMA antenna interfaces » Built-in temperature sensor ensures system reliability » Supports industrial-grade wide-temperature operation from -40°C to 80°C

产品详情 订购信息 下载
Software Specifications
Protocol Support General protocols: Proxy ARP, DNS, HTTP,
HTTPS, IP, ICMP, SNTP, TCP, UDP,
RADIUS, SNMP, PPPoE, IPsec, DHCP
Client/Server, NAPT, NTP, and VLAN Configuration
AP protocols: ARP, BOOTP, DHCP, STP/
RSTP (IEEE 802.1D/w)
Hardware Specifications
Wireless Local Area Network Interface
Standard IEEE 802.11 b/g/n for Wireless LAN
IEEE 802.11i for Wireless Security
IEEE 802.3u for 10/100BaseTX
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1Q VLAN
Operating frequency 2.412–2.472 GHz (Band 13)
Spread Spectrum Modulation DSSK with DBPSK, DQPSK, CCK
OFDM with BPSK, QPSK, 16QAM,
Data transmission rate 802.11b:
CCK@11/5.5 Mbps
DQPSK at 2 Mbps
DBPSK at 11 Mbps
802.11g:
64QAM at 54/48 Mbps
16QAM@36/24Mbps
QPSK@18/12Mbps
BPSK at 9/6 Mbps
802.11n:
64QAM at 300 to BPSK at 6.5 Mbps,
Multiple rates supported
802.11ax: 1024-QAM at 2.4 Gbps
External Interface
Default antenna 1 omnidirectional antenna, 2 dBi, RP-SMA
WAN port 1 10/100 Mbps adaptive WAN, RJ45
LAN port Four 10/100 Mbps adaptive LAN ports, RJ45
Serial interface
Number of channels 1 item
Standard RS232 (TxD, RxD, GND)
RS485 (A, B)
Baud rate 300 bps to 230.4 kbps
Optoelectronic isolation Independent optoelectronic isolation for each channel
Serial Port Protection All signal lines are protected against 15 kV ESD.
Flow Control RS485 Automatic Data Flow Control
Interface Type RJ45
Digital Input
Number of channels 2 items
Dry node Logic 0 (short circuit), Logic 1 (open circuit)
Wet node Logic 0 (0 V), Logic 1 (5 VDC)
Digital Output
Number of channels 1 item
Relay Optocoupler relay, contactless, rating 1 A @ 60 VAC
or 1A @ 60VDC
LED indicator
System Power supply, operation
Network ACT/LINK (located on the RJ45 connector)
Wi-Fi Work Status Indicator
Button
Function Supports “Reset to Factory Defaults”
Real-Time Clock
Real-Time Clock RTC with Built-in Backup Lithium Battery
Mechanical Properties
Housing material Aluminum-magnesium alloy and SECC metal (1 mm)
Weight 600g
Size 55×105×135mm
Installation Method Rail-mounted installation
Work environment
Operating temperature -40 to 80 ℃
Storage temperature -50 to 90°C
Operating humidity 5–95% RH, non-condensing
Seismic performance 1G at IEC-68-2-6, sine wave, 5–500 Hz, 1 octave/min, 1 hour per axis.
Impact resistance 5G @ IEC-68-2-27, half-sine wave, 30 ms
Power Requirements
Power Input 9 to 60 VDC; 24 VDC is recommended.
System Power Consumption Less than 3W
Reliability
Mean Time Between Failures Greater than 200,000 hours
Warranty period 1 year
Close
  • 产品对比
Total X Clear all

去对比

文件名称

文件大小

所属分类

上传时间

预览下载