产品中心

+
  • PWR.png

PWR-1000 Series Industrial-Grade LoRa Gateway, Supporting 1 LoRa Channel, 1 RS485 Serial Port, and 2 DI Inputs

img

所属分类:

PWR Series

» Industrial-grade embedded microprocessor » Built-in single independent LoRa wireless channel » Supports one opto-isolated RS485 serial interface » Supports two digital inputs (DI) » Built-in temperature sensor and hardware encryption » Supports dual-redundant power inputs » Supports SMA antenna interface » Built-in buzzer for alarm functionality » Built-in temperature sensor ensures system reliability » Pre-installed embedded eCos real-time operating system » Supports Modbus RTU communication protocol » Supports industrial-grade wide-temperature operation from -40°C to 80°C

产品详情 订购信息 下载
Software Specifications
Operating System
eCos Embedded Real-Time Operating System
Communication Protocol
Modbus RTU Communication Protocol
Hardware Specifications
Main System
CPU

Industrial-grade embedded microprocessor, 72 MHz

RAM

20KB SRAM

Flash

128KB Flash

Serial interface
Number of channels 1 item
Standard
RS485 (A, B, GND)
Baud rate 300 bps to 230.4 kbps
Port Protection
15 kV ESD, 2 kV surge protection
Flow Control RS485 Automatic Data Flow Control
Optoelectronic isolation

4000 Vrms opto-isolation

Digital Input
Dry node

Logic 0 (short circuit), Logic 1 (open circuit)

Wet node

Logic 0 (0 V), Logic 1 (5 VDC)

Digital Output
Number of channels 1 item
Relay Optocoupler relay, contactless, rating: 1 A @ 60 VAC or 1 A @ 60 VDC
LoRa
Number of channels 8 receive channels, 1 transmit channel
Frequency range 433/470/868/915MHz
Sensitivity -142.5 dBm
Transmit Power 20 to 30 dBm
Transmission rate Up to 5.5 Kbps
Transmission distance 3 km to 10 km
External antenna
Quantity 1 item
Type
Omnidirectional antenna, SMA-F
LED indicator
System RUN
Power supply
PWR1, PWR2
Button
Function Supports “Reset to Factory Defaults”
Real-Time Clock
Real-Time Clock RTC with Built-in Backup Lithium Battery
Mechanical Properties
Housing material

Aluminum-magnesium alloy

Weight

300g

Size

30×70×115mm

Installation Method

Rail-mounted or wall-mounted installation

Work environment
Operating temperature -40 to 80 ℃
Storage temperature -50 to 90°C
Operating humidity 5–95% RH, non-condensing
Seismic performance 1G at IEC-68-2-6, sine wave, 5–500 Hz, 1 octave/min, 1 hour per axis.
Impact resistance 5G @ IEC-68-2-27, half-sine wave, 30 ms
Power Requirements
Power Input 9 to 60 VDC; 12 VDC is recommended.
System Power Consumption Less than 2W
Reliability
Alarm tool Built-in buzzer
Temperature Monitoring Built-in temperature sensor for temperature monitoring.
Watchdog Hardware Watchdog (WDT) Monitoring
Mean Time Between Failures Greater than 500,000 hours
Warranty period 1 year
Close
  • 产品对比
Total X Clear all

去对比

文件名称

文件大小

所属分类

上传时间

预览下载