产品中心

+
  • PIA-340 .png

PIA-340 Series 400 MHz DIN-rail-mounted industrial-grade embedded computer, supporting 2 Ethernet ports, 2 serial interfaces, and 1 dual-band Wi-Fi wireless communication interface.

img

所属分类:

PIA Series

» Industrial-grade embedded processor with a 400 MHz clock speed » 128 MB DDR2 SDRAM » 256 MB NAND Flash » Two 100 Mbps industrial Ethernet interfaces » Two opto-isolated RS485 serial interfaces » One dual-band Wi-Fi wireless communication interface » Built-in real-time clock (RTC) » Built-in temperature sensor and hardware encryption » Built-in buzzer » Pre-installed embedded Linux operating system » Supports industrial-grade wide-temperature operation from -40°C to 80°C

产品详情 订购信息 下载
Software Specifications
Operating System Linux 3.6
Protocol stack TCP, UDP, IPv4, ICMP, ARP, HTTP,
CHAP, PAP, DHCP, NTP, NFS, Telnet,
FTP, TFTP, PPP, PPPoE
Cybersecurity Iptables firewall
Communication Protocol • Full TCP/IP protocol stack
• Modbus communication protocol
Hardware Specifications
Main System
Central Processing Unit Industrial-grade embedded processor, 400 MHz
RAM 128MB DDR2 SDRAM
Flash 256MB Flash
Network interface
Number of channels 2 items
Rate 10/100 Mbps adaptive, RJ45
Isolation protection 15 kV air discharge and 8 kV contact discharge protection
Serial interface
Number of channels 2 items
Standard RS485 (A, B, GND)
Baud rate 300 bps to 230.4 kbps
Optoelectronic isolation Independent optoelectronic isolation for each channel
Serial Port Protection All signal lines are protected against 15 kV ESD.
Flow Control RS-485 Automatic Data Flow Control
Interface Type 5.08mm pitch Phoenix terminal
WLAN (Wi-Fi)
Operating frequency band 2.4 to 2.4835 GHz / 5.15 to 5.85 GHz
Compatibility Standards 802.11a/b/g/n/ac
RF Type DSSS, CCK, OFDM
Transmission rate Up to 433 Mbps
Transmission distance 200 meters (open, unobstructed area)
Power Requirements
Power Input 9 to 60 VDC; 12 VDC is recommended.
System Power Consumption Less than 2W
Real-Time Clock
Real-Time Clock RTC with Built-in Backup Lithium Battery
LED indicator
System Power supply, operation
Serial port TX/RX (P1 to P2)
Network ACT/LINK (located on the RJ45 connector)
Mechanical Properties
Housing material Aluminum-magnesium alloy, vertical design
Weight 300g
Size 30x70x115 mm
Installation Method Rail-mounted installation
Work environment
Operating temperature -40 to 80 ℃
Storage temperature -50 to 90°C
Operating humidity 5–95% RH, non-condensing
Seismic performance 1G at IEC-68-2-6, sine wave, 5–500 Hz, 1 octave/min, 1 hour per axis.
Impact resistance 5G @ IEC-68-2-27, half-sine wave, 30 ms
Reliability
Alarm tool Built-in buzzer
Temperature Monitoring Built-in temperature sensor for temperature monitoring.
Watchdog Hardware Watchdog (WDT) Monitoring
Mean Time Between Failures Greater than 500,000 hours
Warranty period 1 year
Button
Function Supports “Reset to Factory Defaults”
Security
Hardware Encryption Built-in independent hardware encryption circuitry to protect user IP.
Close
  • 产品对比
Total X Clear all

去对比

文件名称

文件大小

所属分类

上传时间

预览下载