产品中心

+
  • PWR.png

PWR-1200 Series Industrial-Grade LoRa Gateway, supporting two independent LoRa modules, seven-mode 4G global network connectivity for long-range wireless communication, two Ethernet ports, two serial ports, two digital inputs, and one digital output.

img

所属分类:

PWR Series

» Industrial-grade embedded microprocessor, 300 MHz » Built-in 64 MB DDR2 SDRAM memory » Built-in 256 MB NAND Flash memory » Supports seven-mode, all-network 4G remote wireless communication » Built-in two independent LoRa communication modules » Supports two 100 Mbps industrial Ethernet interfaces » Supports two RS232/485 serial interfaces » Supports two digital inputs (DI) and one digital output (DO) » Built-in real-time clock (RTC) and buzzer » Built-in temperature sensor and hardware encryption » Supports dual-redundant power inputs » Supports SMA-F multi-antenna interface » Built-in temperature sensor ensures system reliability » Pre-installed embedded Linux operating system » Supports industrial wide-temperature operation from -40°C to 80°C

产品详情 订购信息 下载
Software Specifications
Operating System Linux 3.6
Protocol stack TCP, UDP, IPv4, ICMP, ARP, HTTP,
CHAP, PAP, DHCP, NTP, NFS,
Telnet, FTP, TFTP, PPP, PPPoE
Cybersecurity Iptables firewall
Communication Protocol • Full TCP/IP protocol stack
• Modbus communication protocol
Hardware Specifications
Main System
Central Processing Unit

Industrial-grade embedded microprocessor, 300 MHz

RAM

64MB DDR2 SDRAM

Flash
256MB NAND Flash
Network interface
Number of channels 2 items
Rate 10/100 Mbps adaptive, RJ45
Isolation protection 15 kV air discharge and 8 kV contact discharge protection
Serial interface
Number of channels 2 items
Standard
RS232 (TxD, RxD, GND)

RS485 (A, B, GND)

Baud rate 300 bps to 230.4 kbps
Serial Port Protection All signal lines are protected against 15 kV ESD.
Flow Control RS485 Automatic Data Flow Control
Interface Type
RJ45
Digital Input
Number of channels 2 items
Dry node

Logic 0 (short circuit), Logic 1 (open circuit)

Wet node

Logic 0 (0 V), Logic 1 (5 VDC)

Digital Output
Number of channels 1 item
Relay Optocoupler relay, contactless, rating: 1 A @ 60 VAC or 1 A @ 60 VDC
LoRa
Number of channels 8 receive channels, 1 transmit channel
Frequency range 433/868/915MHz
Sensitivity -142.5 dBm
Transmit Power 20 to 30 dBm
Transmission rate Up to 5.5 Kbps
Transmission distance 3 km to 10 km
4G (Seven-band All-Network Compatibility)
Technical system Four-band TDD-LTE, three-band FDD-LTE
Peak rate 100 Mbps (downstream), 50 Mbps (upstream)
LED indicator
System Power supply, operation
Serial port TXD/RXD
Network ACT/LINK (position   on the RJ45 connector)
Button
Function Supports “Reset to Factory Defaults”
Real-Time Clock
Real-Time Clock RTC with Built-in Backup Lithium Battery
Mechanical Properties
Housing material

Aluminum-magnesium alloy

Weight

600g

Size

55×105×135mm

Installation Method Guide rail installation
Work environment
Operating temperature -40 to 80 ℃
Storage temperature -50 to 90°C
Operating humidity 5–95% RH, non-condensing
Seismic performance 1G at IEC-68-2-6, sine wave, 5–500 Hz, 1 octave/min, 1 hour per axis.
Impact resistance 5G @ IEC-68-2-27, half-sine wave, 30 ms
Power Requirements
Power Input 9 to 60 VDC; 12 VDC is recommended.
System Power Consumption Less than 3W
Reliability
Alarm tool Built-in buzzer
Temperature Monitoring Built-in temperature sensor for temperature monitoring.
Watchdog Hardware Watchdog (WDT) Monitoring
Mean Time Between Failures Greater than 500,000 hours
Warranty period 1 year
Close
  • 产品对比
Total X Clear all

去对比

文件名称

文件大小

所属分类

上传时间

预览下载

文件名称

所属分类

下载