产品中心
PWM-6032 Series Industrial-Grade Wireless Data Acquisition Module, supporting 4 digital inputs, 4 digital outputs, 2 analog inputs, 1 RS485 serial port, and WIFI/LoRa wireless communication.
所属分类:
PWM Series
» Supports 4 isolated digital inputs and 4 digital outputs » Supports 2 analog inputs » Digital inputs support both dry-contact and wet-contact signals » Digital outputs support optocoupler relays » Analog inputs support voltage and current signals » Supports 1 opto-isolated RS485 communication interface » Supports the Modbus communication protocol » Supports local Wi-Fi wireless communication » Supports local LoRa wireless communication » 1 SMA-K antenna interface » Built-in port isolation and protection to meet field application requirements » Supports a wide input voltage range of DC 9V to 60V with dual power supply redundancy » Supports industrial-grade wide-temperature operation from -40°C to 80°C » Supports standard DIN rail mounting
| Software Specifications | |
| Operating System | eCos Embedded Real-Time Operating System |
| Communication Protocol |
• Modbus communication protocol • LoRaWAN communication protocol |
| Hardware Specifications | |
| Serial interface | |
| Number of channels | 1 item |
| Standard | RS485 (A, B) |
| Baud rate | 300 bps to 230.4 kbps |
| Port Protection | All signal lines are protected against 15 kV ESD. |
| Port Isolation | 3 kV digital optoelectronic isolation |
| Interface format | 3.81mm pitch Phoenix terminal |
| Wi-Fi | |
| Standard | IEEE 802.11 b/g/n for Wireless LAN |
| IEEE 802.11i for Wireless Security | |
| IEEE 802.3u for 10/100BaseTX | |
| IEEE 802.1D for Spanning Tree Protocol | |
| IEEE 802.1w for Rapid STP | |
| IEEE 802.1Q VLAN | |
| Operating frequency | 2.412–2.472 GHz (Band 13) |
| Digital Input | |
| Number of channels | Four |
| Dry node | Logic 0 (short circuit), Logic 1 (open circuit) |
| Wet node | Logic 0 (0 V), Logic 1 (5 VDC) |
| Isolation protection | 3 kV digital optoelectronic isolation |
| Interface format | 3.81mm pitch Phoenix terminal |
| Digital Output | |
| Number of channels | Four |
| Relay | Optocoupler relay, contactless, rating: 1 A @ 60 VAC or 1 A @ 60 VDC |
| Interface format | 3.81mm pitch Phoenix terminal |
| LoRa | |
| Number of channels | 8 receive channels, 1 transmit channel |
| Frequency range | 433/470/868/915MHz |
| Sensitivity | -142.5 dBm |
| Transmit Power | 20 to 30 dBm |
| Transmission rate | Up to 5.5 Kbps |
| Transmission distance | 3 km to 10 km |
| Analog Input | |
| Number of channels | 2 items |
| Resolution | 16 bits |
| Sampling rate | Not less than 50 Hz |
| Signal Type | Voltage and current signals |
| Signal Range | 4–20 mA, 0–5 V, 0–10 V |
| Interface format | 3.81mm pitch Phoenix terminal |
| LED indicator | |
| System | RUN |
| Power supply | PWR1, PWR2 |
| Button | |
| Function | Supports “Reset to Factory Defaults” |
| Real-Time Clock | |
| Real-Time Clock | RTC with Built-in Backup Lithium Battery |
| Mechanical Properties | |
| Housing material | Aluminum-magnesium alloy |
| Weight | 300g |
| Size | 30×70×115mm |
| Installation Method | Rail-mounted or wall-mounted installation |
| Work environment | |
| Operating temperature | -40 to 80 ℃ |
| Storage temperature | -50 to 90°C |
| Operating humidity | 5–95% RH, non-condensing |
| Seismic performance | 1G at IEC-68-2-6, sine wave, 5–500 Hz, 1 octave/min, 1 hour per axis. |
| Impact resistance | 5G @ IEC-68-2-27, half-sine wave, 30 ms |
| Power Requirements | |
| Power Input | 9 to 60 VDC, dual-redundant input |
| System Power Consumption | Less than 2W |
| Reliability | |
| Mean Time Between Failures | Greater than 500,000 hours |
| Warranty period | 1 year |
- 产品对比
去对比

文件名称
文件大小
所属分类
上传时间
预览下载
362.4KB
Industrial switch
2024-05-20
文件名称
所属分类
下载