产品中心
PWK-3260 Series Industrial-Grade IEEE 802.11ax (Wi-Fi 6) High-Power Dual-Band Dual-Channel Wireless AP/Bridge/Client, with 2 LAN ports, 4 serial ports, 2 DI inputs, and 1 DO output.
所属分类:
PWK Series
» Supports IEEE 802.11ax (Wi-Fi 6) standard » Two 10/100 Mbps adaptive LAN ports » Four opto-isolated RS232/485 serial ports » Two digital inputs and one digital output » Supports 2.4 GHz and 5 GHz communication bands » Supports data transmission rates of up to 2.4 Gbps » Supports MU-MIMO technology for multi-terminal channel sharing » Enables higher concurrent user capacity and greater per-user bandwidth » Supports dual redundant power inputs » High-power signal provides wider coverage » Supports SMA dual-antenna interface » Built-in temperature sensor ensures system reliability » Supports industrial-grade wide-temperature operation from -40°C to 80°C
| Software Specifications | |
| Protocol Support | General protocols: Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, PPPoE, IPsec, DHCP Client/Server, NAPT, NTP, and VLAN Configuration |
| AP protocols: ARP, BOOTP, DHCP, STP/ RSTP (IEEE 802.1D/w) |
|
| Hardware Specifications | |
| Wireless Local Area Network Interface | |
| Standard | IEEE 802.11 b/g/n for Wireless LAN |
| IEEE 802.11i for Wireless Security | |
| IEEE 802.3u for 10/100BaseTX | |
| IEEE 802.1D for Spanning Tree Protocol | |
| IEEE 802.1w for Rapid STP | |
| IEEE 802.1Q VLAN | |
| Operating frequency | 2.412–2.472 GHz (Band 13) |
| Spread Spectrum Modulation | DSSK with DBPSK, DQPSK, CCK |
| OFDM with BPSK, QPSK, 16QAM, | |
| 64QAM, 256QAM, 1024QAM | |
| Data transmission rate | 802.11b: |
| CCK@11/5.5 Mbps | |
| DQPSK at 2 Mbps | |
| DBPSK at 11 Mbps | |
| 802.11g: | |
| 64QAM at 54/48 Mbps | |
| 16QAM@36/24Mbps | |
| QPSK@18/12Mbps | |
| BPSK at 9/6 Mbps | |
| 802.11n: | |
| 64QAM at 300 to BPSK at 6.5 Mbps, | |
| Multiple rates supported | |
| 802.11ax: 1024-QAM at 2.4 Gbps | |
| External Interface | |
| Default antenna | 2 omnidirectional antennas, 2 dBi, RP-SMA |
| LAN port | Two 10/100 Mbps adaptive LAN ports, RJ45 |
| Serial interface | |
| Number of channels | Four |
| Standard | RS232 (TxD, RxD, GND) |
| RS485 (A, B) | |
| Serial Port Protection | All signal lines are protected against 15 kV ESD. |
| Flow Control | RS485 Automatic Data Flow Control |
| Digital Input | |
| Number of channels | 2 items |
| Dry node | Logic 0 (short circuit), Logic 1 (open circuit) |
| Wet node | Logic 0 (0 V), Logic 1 (5 VDC) |
| Digital Output | |
| Number of channels | 1 item |
| Relay | Optocoupler relay, contactless, rating 1 A @ 60 VAC or 1A @ 60VDC |
| LED indicator | |
| System | Power supply, operation |
| Network | ACT/LINK (located on the RJ45 connector) |
| Wi-Fi | Work Status Indicator |
| Button | |
| Function | Supports “Reset to Factory Defaults” |
| Real-Time Clock | |
| Real-Time Clock | RTC with Built-in Backup Lithium Battery |
| Mechanical Properties | |
| Housing material | Aluminum-magnesium alloy and SECC metal (1 mm) |
| Weight | 600g |
| Size | 55×105×135mm |
| Installation Method | Rail-mounted installation |
| Work environment | |
| Operating temperature | -40 to 80 ℃ |
| Storage temperature | -50 to 90°C |
| Operating humidity | 5–95% RH, non-condensing |
| Seismic performance | 1G at IEC-68-2-6, sine wave, 5–500 Hz, 1 octave/min, 1 hour per axis. |
| Impact resistance | 5G @ IEC-68-2-27, half-sine wave, 30 ms |
| Power Requirements | |
| Power Input | 9 to 60 VDC; 24 VDC is recommended. |
| System Power Consumption | Less than 3W |
| Reliability | |
| Mean Time Between Failures | Greater than 500,000 hours |
| Warranty period | 1 year |
- 产品对比
去对比

文件名称
文件大小
所属分类
上传时间
预览下载
458.8KB
Industrial switch
2024-05-20
文件名称
所属分类
下载