产品中心
DRG-1200-GJB Analog Output Isolated Safety Barrier, 100% Made in China
所属分类:
100% domestically produced safety barrier
DRG Series
The DRG-1200-GJB is a 4–20 mA output, intrinsically safe isolation barrier that isolates and transmits 4–20 mA signals from the safe area to the hazardous area, thereby powering field actuators, valves, and other equipment. This product requires an independent power supply, features complete electrical isolation among the power supply, input, and output, and supports bidirectional HART communication. All internal electronic components are sourced domestically, achieving a 100% localization rate.
通道数:
One in, one out
输入:
4~20mA
配电:
输出:
供电方式:
电源连接方式 :

- 产品对比
去对比
| Basic Parameters | |
| Number of channels | 1 in, 1 out |
| Output accuracy (20°C) | 0.1% F.S. (typical value: 0.05% F.S.) |
| Temperature drift | 0.005% F.S./°C |
| Response time | 90% of the final value is reached in 2 ms. |
| Dielectric strength | 1500 VAC for intrinsically safe terminals vs. non-intrinsically safe terminals; 1000 VAC for non-intrinsically safe terminals vs. non-intrinsically safe terminals. |
| Insulation resistance | Non-intrinsically safe terminal–intrinsically safe terminal ≥ 100 MΩ; power supply–non-intrinsically safe terminal ≥ 100 MΩ. |
| Electromagnetic Compatibility | Complies with IEC 61326-1 (GB/T 18268) and IEC 61326-3-1. |
| Explosion-proof marking | [Ex ia Ga]ⅡC |
| Weight | Approximately 150g |
| Connected field devices |
Suitable for valve positioners and electro-pneumatic transducers.
|
| Applicable Locations | Zone 0, Zone 1, Zone 2; IIA, IIB, IIC hazardous areas |
| Input data | |
| Input signal | 4 mA to 20 mA |
| Output data | |
| Output signal | 4 mA to 20 mA / 1 to 5 V |
| Distribution Output Power | When the output current is 20 mA, the supply voltage is greater than 16 V. |
| Power supply | |
| Power Supply | 20~35V DC |
| Power Protection | Reverse Power Protection |
| Power consumption | 1 W (with 24 V supply and 20 mA output) |
| Power Supply Method | Independent power supply |
| Power Connection Method | Base power supply; terminal power supply |
| Size | |
| Centralized power supply | |
| Depth | 120.8mm |
| Height | 113mm |
| Width | 13.3mm |
| Independent power supply | |
| Depth | 110mm |
| Height | 108mm |
| Width | 13.3mm |
| Housing | |
| Materials | PC+ABS flame retardant |
| Protection Level | IP20 |
| Flame-retardant rating | UL94/V0 |
| Color | White + Gray |
| EMC data | |
| Electrical Fast Transient/Burst Immunity | Standards: IEC 61326-1; Class A |
| Surge (Impulse) Immunity | Standards: IEC 61326-1; Class B |
| Radio-frequency electromagnetic field radiation immunity | Standards: IEC 61326-1; Compliance with Essential Requirements |
| Electrostatic Discharge Immunity | Standards: IEC 61326-1; Class A |
| Immunity to Conducted Disturbances Induced by Radio-Frequency Fields | Standards: IEC 61326-1; Compliance with Essential Requirements |
| Low-Frequency Common-Mode Conduction | Standards: IEC 61326-1; Compliance with Essential Requirements |
| Operating Environment | |
| Continuous operating temperature | -20℃~+60℃ |
| Storage temperature | -40℃~+80℃ |
| Relative humidity | 10%~90% |
| Environmental Requirements | The surrounding environment shall be free from severe vibration, impact, and electromagnetic interference such as high currents and sparks. The air shall not contain any corrosive media that can attack chromium, nickel, or silver plating, nor shall it contain flammable or explosive substances. |
| Connection Parameters | |
| Wire cross-sectional area range | 0.5~2.5 mm² |
| Minimum Wire Cross-Sectional Area AWG | 24 |
| Maximum Conductor Cross-Sectional Area AWG | 12 |
| Wire stripping length | 8mm |
| Thread | M3 |
| Connection method | Screw connection |
| Minimum Tightening Torque | 0.5 Nm |
| Maximum Tightening Torque | 0.6 Nm |
| Install | |
| Installation Method | DIN 35 mm rail mounting |
| Attention | |
| Usage Restrictions | 1. The HHC (HART handheld communicator) shall not be used simultaneously in hazardous and non-hazardous areas. 2. Any HHC (HART handheld communicator) used in hazardous areas must be explosion-proof certified. |
| External dimensions | |||
| Base-centralized power supply type | Terminal-powered | ||
![]() |
![]() |
||
| Installation Method | |||
![]() |
![]() |
![]() |
![]() |
| Basic Parameters | |
| Number of channels | 1 in, 1 out |
| Output accuracy (20°C) | 0.1% F.S. (typical value: 0.05% F.S.) |
| Temperature drift | 0.005% F.S./°C |
| Response time | 90% of the final value is reached in 2 ms. |
| Dielectric strength | 1500 VAC for intrinsically safe terminals vs. non-intrinsically safe terminals; 1000 VAC for non-intrinsically safe terminals vs. non-intrinsically safe terminals. |
| Insulation resistance | Non-intrinsically safe terminal–intrinsically safe terminal ≥ 100 MΩ; power supply–non-intrinsically safe terminal ≥ 100 MΩ. |
| Electromagnetic Compatibility | Complies with IEC 61326-1 (GB/T 18268) and IEC 61326-3-1. |
| Explosion-proof marking | [Ex ia Ga]ⅡC |
| Weight | Approximately 150g |
| Connected field devices |
Suitable for valve positioners and electro-pneumatic transducers.
|
| Applicable Locations | Zone 0, Zone 1, Zone 2; IIA, IIB, IIC hazardous areas |
| Input data | |
| Input signal | 4 mA to 20 mA |
| Output data | |
| Output signal | 4 mA to 20 mA / 1 to 5 V |
| Distribution Output Power | When the output current is 20 mA, the supply voltage is greater than 16 V. |
| Power supply | |
| Power Supply | 20~35V DC |
| Power Protection | Reverse Power Protection |
| Power consumption | 1 W (with 24 V supply and 20 mA output) |
| Power Supply Method | Independent power supply |
| Power Connection Method | Base power supply; terminal power supply |
| Size | |
| Centralized power supply | |
| Depth | 120.8mm |
| Height | 113mm |
| Width | 13.3mm |
| Independent power supply | |
| Depth | 110mm |
| Height | 108mm |
| Width | 13.3mm |
| Housing | |
| Materials | PC+ABS flame retardant |
| Protection Level | IP20 |
| Flame-retardant rating | UL94/V0 |
| Color | White + Gray |
| EMC data | |
| Electrical Fast Transient/Burst Immunity | Standards: IEC 61326-1; Class A |
| Surge (Impulse) Immunity | Standards: IEC 61326-1; Class B |
| Radio-frequency electromagnetic field radiation immunity | Standards: IEC 61326-1; Compliance with Essential Requirements |
| Electrostatic Discharge Immunity | Standards: IEC 61326-1; Class A |
| Immunity to Conducted Disturbances Induced by Radio-Frequency Fields | Standards: IEC 61326-1; Compliance with Essential Requirements |
| Low-Frequency Common-Mode Conduction | Standards: IEC 61326-1; Compliance with Essential Requirements |
| Operating Environment | |
| Continuous operating temperature | -20℃~+60℃ |
| Storage temperature | -40℃~+80℃ |
| Relative humidity | 10%~90% |
| Environmental Requirements | The surrounding environment shall be free from severe vibration, impact, and electromagnetic interference such as high currents and sparks. The air shall not contain any corrosive media that can attack chromium, nickel, or silver plating, nor shall it contain flammable or explosive substances. |
| Connection Parameters | |
| Wire cross-sectional area range | 0.5~2.5 mm² |
| Minimum Wire Cross-Sectional Area AWG | 24 |
| Maximum Conductor Cross-Sectional Area AWG | 12 |
| Wire stripping length | 8mm |
| Thread | M3 |
| Connection method | Screw connection |
| Minimum Tightening Torque | 0.5 Nm |
| Maximum Tightening Torque | 0.6 Nm |
| Install | |
| Installation Method | DIN 35 mm rail mounting |
| Attention | |
| Usage Restrictions | 1. The HHC (HART handheld communicator) shall not be used simultaneously in hazardous and non-hazardous areas. 2. Any HHC (HART handheld communicator) used in hazardous areas must be explosion-proof certified. |
| External dimensions | |||
| Base-centralized power supply type | Terminal-powered | ||
![]() |
![]() |
||
| Installation Method | |||
![]() |
![]() |
![]() |
![]() |
文件名称
文件大小
所属分类
上传时间
预览下载
302.8KB
Safety barrier
2024-05-20
208.8KB
Signal isolator
2023-09-19
144.4KB
Signal isolator
2023-09-19
446.7KB
Qualifications
2024-05-20
文件名称
所属分类
下载





