PASR-9000-AB Suitable for monitoring emergency stop switch and safety door

Classification:

PASR-9000 series

PASR-9000-AB is suitable for emergency stop buttons, safety door control switches, and safety relays with 2 NO (normally open) safety output contacts and 2 NC (normally closed) auxiliary output contacts. It supports single and dual channel operation, manual or automatic reset, and has channel to channel short circuit monitoring function.

Input device:

Emergency stop button/safety door

Supply voltage:

24V DC

Number of output contacts:

2NO+2NC

Reset mode:

Auto/manual reset

Contact switching capacity:

Click to consult

Add to comparison

Product inquiry

Product Details Technical parameters Download

产品对比

Total X Clear all

Contrast

General
General
Number of channels	Dual channel input
Switch capacity
Switch capacity
Rated heating current Ith	5A
Insurance level	6A fast or 4A slow
Usage category	AC-15,DC-13
Time
Time
Dual channel input time	Unlimited
Safe output time under rated voltage	Manual start 35ms
Safe disconnection time under rated voltage	10ms
Contact material and structure	AgSnO+0.2um Au, forced open contact
Contact resistance	≤100mΩ
Mechanical life	10 million times
Operation frequency	6 times/minute
Status display	Three green LEDs
Start button monitoring	Manual start/automatic start
Rated insulation voltage	300V (pollution level 2 according to IEC60947-5-1)
Rated impulse withstand voltage	2500V (Class 2 overvoltage according to IEC60947-5-1)
Applicable	Emergency stop switch, safety door
Input data
Input data
Input channel	Dual channel input
Input current	≤50mA
Wire resistance	≤15Ω
Output data
Output data
Output capacity	2NO+2NC
Output channel	2-channel normally open output (13-14, 23-24)
	2-channel normally closed output (31-32, 41-42)
	2-channel normally closed output (31-32, 41-42)
Power supply
Power supply
Supply voltage	24VDC
Voltage range	85%～110%
Module power consumption	≤ 90mA （24V DC）
Overall dimension
Overall dimension
Height	114.5mm
Width	99mm
Thickness	22.5mm
Housing
Housing
Material	ABSflame retardant
Degree of protection	IP20
Flammability rating	UL94/V0
Colour	Grey+Yellow
EMC data
EMC data
Electrical fast transient/burst immunity	Compliant with:IEC 61326-1;A-leve
Surge immunity	Compliant with:IEC 61326-1;B-leve
Radiated,radio-frequency,electromagnetic field immunity	Compliant with:IEC 61326-1;conform to basic requirements
Electrostatic discharge immunity	Compliant with:IEC 61326-1;A-leve
Immunity to conducted disturbances, induced by radio-frequency fields	Compliant with:IEC 61326-1;conform to basic requirements
Low frequency common mode conduction	Compliant with:IEC 61326-1;conform to basic requirements
Compliant with standards	BS EN 62061：2015，ISO 13849-1：2015，ISO 13849-2:2012, IEC EN 60204-1, ISO 13849-1
Safety Integrity Level (SIL)	EN954-1, maximum safety control level 4
Performance level (PL)	ISO 13849-1：2015，PLe
Operating conditions
Operating conditions
Continuous operating temperature	﹣20℃～﹢60℃
Storage temperature	﹣40℃～＋85℃
Relative humidity	＜90% RH (no condensate)
Environmental requirements	There should be no strong vibrations, impacts, high currents, sparks or other electromagnetic induction effects in the surrounding environment. The air should not contain media that corrode chromium, nickel, and silver coatings, and should not contain flammable or explosive substances
Connection data
Connection data
Conductor cross section solid range	0.5～2.5mm²
Conductor cross section AWG min.	12
Conductor cross section AWG max.	24
Stripping length	8mm
Screw thread	M3
Connection method	Screw connection
Tightening torque min.	0.5 Nm
Tightening torque max.	0.6 Nm
Installation
Installation
Installation method	DIN35mm