产品中心
PASR-8000-2AE DO signal (FGS/GDS system) 2AE
所属分类:
PASR-8000 Series
The PASR-8000-2AE is a safety relay control module designed for DO signal isolation and conversion in FGS/GDS systems. It features two normally de-energized safety contacts (ND/ETS) and can monitor the status of field loads. The internal circuitry incorporates fail-safe technology and triple redundancy, with an output contact rating of up to 5 A.
输入设备:
供电电压:
24V DC
输出触点数:
复位方式:
Automatic / Manual Reset
触点切换容量:
5A
产品详情
技术参数
下载

Close
- 产品对比
去对比
| Basic Parameters | |
| Electromagnetic Compatibility | EN 60947, EN 61000-6-2, EN 61000-6-4 |
| Rated Insulation Voltage | 250 V (Pollution Degree 2 in accordance with IEC 60947-5-1) |
| Rated impulse withstand voltage | 6000 V (Category 3 overvoltage as defined in IEC 60947-5-1) |
| Dielectric strength | 1500V AC, 1 min |
| Time | |
| Absorption buffer time | ≤30ms |
| Release buffer time | ≤30ms |
| Recovery time | ≤30ms |
| Short-term power interruption | 20ms |
| Contact resistance | ≤100 mΩ |
| Applicable | DO signal |
| Input parameters | |
| Input signal | DO signal |
| Input current | ≤40mA (24VDC) |
| Wire resistance | ≤15Ω |
| Input device | Safety switches, contact switches, SIS DO signals |
| Output data | |
| Number of contacts | 2AE |
| Output signal | Relay output |
| Contact material | AgNi+Au |
| Contact Fuse Protection | 5A (Fuse socket) |
| Contact capacity | 5A/250V; 5A/30V |
| Power supply | |
| Power supply voltage | 24V DC |
| Current loss | ≤ 35 mA (24 VDC) |
| Voltage tolerance | 20.4 ~ 26.4VDC |
| Operating Environment | |
| Continuous operating temperature | -20℃~+60℃ |
| Storage temperature | -40℃ to +85℃ |
| Relative humidity | 10% ~ 90% |
| Size | |
| Height | 114.5mm |
| Width | 99mm |
| Thickness | 22.5mm |
文件名称
文件大小
所属分类
上传时间
预览下载
文件名称
所属分类
下载