产品中心

PRODUCTS

产品中心

×

JH-500 Series 100 Mbps 8-Port Industrial Ethernet Switch

» Domestically produced chip, fully self-reliant and controllable » Ensures reliable data transmission and long operational life » Supports 10/100 Mbps, full/half-duplex, and MDI/MDI-X auto-negotiation » Store-and-forward operation, supports multiple protocols » Complies with industrial-grade operating standards, with a mean time between failures of 300,000 hours » Operating power supply: DC 12–48 V, with reverse-polarity protection » IP40 protection rating, metal enclosure, fanless design, and low-power consumption
JH-500 Series 100 Mbps 8-Port Industrial Ethernet Switch

JH-500 Series 100 Mbps 8-Port Industrial Ethernet Switch

» Domestically produced chip, fully self-reliant and controllable » Ensures reliable data transmission and long operational life » Supports 10/100 Mbps, full/half-duplex, and MDI/MDI-X auto-negotiation » Store-and-forward operation, supports multiple protocols » Complies with industrial-grade operating standards, with a mean time between failures of 300,000 hours » Operating power supply: DC 12–48 V, with reverse-polarity protection » IP40 protection rating, metal enclosure, fanless design, and low-power consumption
×

JH-500 Series 100 Mbps 5-Port Industrial Ethernet Switch

» Domestically produced chip, fully self-reliant and controllable » Ensures reliable data transmission and long operational life » Supports 10/100 Mbps, full/half-duplex, and MDI/MDI-X auto-negotiation » Store-and-forward operation, supports multiple protocols » Complies with industrial-grade operating standards, with a mean time between failures of 300,000 hours » Operating power supply: DC 12–48 V, with reverse-polarity protection » IP40 protection rating, metal enclosure, fanless design, and low-power consumption
JH-500 Series 100 Mbps 5-Port Industrial Ethernet Switch

JH-500 Series 100 Mbps 5-Port Industrial Ethernet Switch

» Domestically produced chip, fully self-reliant and controllable » Ensures reliable data transmission and long operational life » Supports 10/100 Mbps, full/half-duplex, and MDI/MDI-X auto-negotiation » Store-and-forward operation, supports multiple protocols » Complies with industrial-grade operating standards, with a mean time between failures of 300,000 hours » Operating power supply: DC 12–48 V, with reverse-polarity protection » IP40 protection rating, metal enclosure, fanless design, and low-power consumption
×

PWR-1200 Series Industrial-Grade LoRa Gateway, supporting two independent LoRa modules, seven-mode 4G global network connectivity for long-range wireless communication, two Ethernet ports, two serial ports, two digital inputs, and one digital output.

» Industrial-grade embedded microprocessor, 300 MHz » Built-in 64 MB DDR2 SDRAM memory » Built-in 256 MB NAND Flash memory » Supports seven-mode, all-network 4G remote wireless communication » Built-in two independent LoRa communication modules » Supports two 100 Mbps industrial Ethernet interfaces » Supports two RS232/485 serial interfaces » Supports two digital inputs (DI) and one digital output (DO) » Built-in real-time clock (RTC) and buzzer » Built-in temperature sensor and hardware encryption » Supports dual-redundant power inputs » Supports SMA-F multi-antenna interface » Built-in temperature sensor ensures system reliability » Pre-installed embedded Linux operating system » Supports industrial wide-temperature operation from -40°C to 80°C
PWR-1200 Series Industrial-Grade LoRa Gateway, supporting two independent LoRa modules, seven-mode 4G global network connectivity for long-range wireless communication, two Ethernet ports, two serial ports, two digital inputs, and one digital output.

PWR-1200 Series Industrial-Grade LoRa Gateway, supporting two independent LoRa modules, seven-mode 4G global network connectivity for long-range wireless communication, two Ethernet ports, two serial ports, two digital inputs, and one digital output.

» Industrial-grade embedded microprocessor, 300 MHz » Built-in 64 MB DDR2 SDRAM memory » Built-in 256 MB NAND Flash memory » Supports seven-mode, all-network 4G remote wireless communication » Built-in two independent LoRa communication modules » Supports two 100 Mbps industrial Ethernet interfaces » Supports two RS232/485 serial interfaces » Supports two digital inputs (DI) and one digital output (DO) » Built-in real-time clock (RTC) and buzzer » Built-in temperature sensor and hardware encryption » Supports dual-redundant power inputs » Supports SMA-F multi-antenna interface » Built-in temperature sensor ensures system reliability » Pre-installed embedded Linux operating system » Supports industrial wide-temperature operation from -40°C to 80°C
×

PWR-1000 Series Industrial-Grade LoRa Gateway, Supporting 1 LoRa Channel, 1 RS485 Serial Port, and 2 DI Inputs

» Industrial-grade embedded microprocessor » Built-in single independent LoRa wireless channel » Supports one opto-isolated RS485 serial interface » Supports two digital inputs (DI) » Built-in temperature sensor and hardware encryption » Supports dual-redundant power inputs » Supports SMA antenna interface » Built-in buzzer for alarm functionality » Built-in temperature sensor ensures system reliability » Pre-installed embedded eCos real-time operating system » Supports Modbus RTU communication protocol » Supports industrial-grade wide-temperature operation from -40°C to 80°C
PWR-1000 Series Industrial-Grade LoRa Gateway, Supporting 1 LoRa Channel, 1 RS485 Serial Port, and 2 DI Inputs

PWR-1000 Series Industrial-Grade LoRa Gateway, Supporting 1 LoRa Channel, 1 RS485 Serial Port, and 2 DI Inputs

» Industrial-grade embedded microprocessor » Built-in single independent LoRa wireless channel » Supports one opto-isolated RS485 serial interface » Supports two digital inputs (DI) » Built-in temperature sensor and hardware encryption » Supports dual-redundant power inputs » Supports SMA antenna interface » Built-in buzzer for alarm functionality » Built-in temperature sensor ensures system reliability » Pre-installed embedded eCos real-time operating system » Supports Modbus RTU communication protocol » Supports industrial-grade wide-temperature operation from -40°C to 80°C
×

PWM-6032 Series Industrial-Grade Wireless Data Acquisition Module, supporting 4 digital inputs, 4 digital outputs, 2 analog inputs, 1 RS485 serial port, and WIFI/LoRa wireless communication.

» Supports 4 isolated digital inputs and 4 digital outputs » Supports 2 analog inputs » Digital inputs support both dry-contact and wet-contact signals » Digital outputs support optocoupler relays » Analog inputs support voltage and current signals » Supports 1 opto-isolated RS485 communication interface » Supports the Modbus communication protocol » Supports local Wi-Fi wireless communication » Supports local LoRa wireless communication » 1 SMA-K antenna interface » Built-in port isolation and protection to meet field application requirements » Supports a wide input voltage range of DC 9V to 60V with dual power supply redundancy » Supports industrial-grade wide-temperature operation from -40°C to 80°C » Supports standard DIN rail mounting
PWM-6032 Series Industrial-Grade Wireless Data Acquisition Module, supporting 4 digital inputs, 4 digital outputs, 2 analog inputs, 1 RS485 serial port, and WIFI/LoRa wireless communication.

PWM-6032 Series Industrial-Grade Wireless Data Acquisition Module, supporting 4 digital inputs, 4 digital outputs, 2 analog inputs, 1 RS485 serial port, and WIFI/LoRa wireless communication.

» Supports 4 isolated digital inputs and 4 digital outputs » Supports 2 analog inputs » Digital inputs support both dry-contact and wet-contact signals » Digital outputs support optocoupler relays » Analog inputs support voltage and current signals » Supports 1 opto-isolated RS485 communication interface » Supports the Modbus communication protocol » Supports local Wi-Fi wireless communication » Supports local LoRa wireless communication » 1 SMA-K antenna interface » Built-in port isolation and protection to meet field application requirements » Supports a wide input voltage range of DC 9V to 60V with dual power supply redundancy » Supports industrial-grade wide-temperature operation from -40°C to 80°C » Supports standard DIN rail mounting
×

PWM-6031 Series Industrial-Grade Wireless Data Acquisition Module, supporting 8 analog inputs, 2 analog outputs, 1 RS485 serial port, and WIFI/LoRa wireless communication.

» Supports 8 analog inputs with 16-bit resolution » Supports 2 analog outputs with 12-bit resolution » Analog input range: 0–5 V / 0–10 V » Analog output range: 4–20 mA » Supports 1 opto-isolated RS485 communication interface » Supports Modbus communication protocol » Supports Wi-Fi local wireless communication » Supports LoRa local wireless communication » 1 SMA-K antenna interface » Built-in port isolation and protection to meet field application requirements » Supports wide-range DC 9–60 V power supply with dual-power redundancy » Supports industrial-grade wide-temperature operation from –40°C to 80°C » Supports standard DIN rail mounting
PWM-6031 Series Industrial-Grade Wireless Data Acquisition Module, supporting 8 analog inputs, 2 analog outputs, 1 RS485 serial port, and WIFI/LoRa wireless communication.

PWM-6031 Series Industrial-Grade Wireless Data Acquisition Module, supporting 8 analog inputs, 2 analog outputs, 1 RS485 serial port, and WIFI/LoRa wireless communication.

» Supports 8 analog inputs with 16-bit resolution » Supports 2 analog outputs with 12-bit resolution » Analog input range: 0–5 V / 0–10 V » Analog output range: 4–20 mA » Supports 1 opto-isolated RS485 communication interface » Supports Modbus communication protocol » Supports Wi-Fi local wireless communication » Supports LoRa local wireless communication » 1 SMA-K antenna interface » Built-in port isolation and protection to meet field application requirements » Supports wide-range DC 9–60 V power supply with dual-power redundancy » Supports industrial-grade wide-temperature operation from –40°C to 80°C » Supports standard DIN rail mounting
×

PWM-6030 Series Industrial-Grade Wireless Data Acquisition Module, supporting 8 voltage/current signal inputs, 1 RS485 serial port, and WIFI/LoRa wireless communication.

» Supports 8 voltage/current signal inputs » Supports 16-bit resolution » Supports 4–20 mA and 0–5 V/10 V signal ranges » Sampling frequency no less than 50 Hz » Supports one opto-isolated RS485 communication interface » Supports Modbus communication protocol » Supports Wi-Fi local wireless communication » Supports LoRa local wireless communication » One SMA-K antenna interface » Built-in port isolation and protection to meet field application requirements » Supports wide-range DC 9–60 V power supply with dual-power redundancy » Supports industrial-grade wide-temperature operation from –40 to 80°C » Supports standard DIN rail mounting
PWM-6030 Series Industrial-Grade Wireless Data Acquisition Module, supporting 8 voltage/current signal inputs, 1 RS485 serial port, and WIFI/LoRa wireless communication.

PWM-6030 Series Industrial-Grade Wireless Data Acquisition Module, supporting 8 voltage/current signal inputs, 1 RS485 serial port, and WIFI/LoRa wireless communication.

» Supports 8 voltage/current signal inputs » Supports 16-bit resolution » Supports 4–20 mA and 0–5 V/10 V signal ranges » Sampling frequency no less than 50 Hz » Supports one opto-isolated RS485 communication interface » Supports Modbus communication protocol » Supports Wi-Fi local wireless communication » Supports LoRa local wireless communication » One SMA-K antenna interface » Built-in port isolation and protection to meet field application requirements » Supports wide-range DC 9–60 V power supply with dual-power redundancy » Supports industrial-grade wide-temperature operation from –40 to 80°C » Supports standard DIN rail mounting
×

PWM-6012 Series Industrial-Grade Wireless Data Acquisition Module, supporting 8 isolated digital inputs, 4 optocoupler relay outputs, 1 RS485 serial port, and WIFI/LoRa wireless communication.

» Supports 8 isolated digital inputs » Supports 4 optocoupler-based relay digital outputs » Supports 1 opto-isolated RS485 communication interface » Supports the Modbus communication protocol » Supports Wi-Fi local wireless communication » Supports LoRa local wireless communication » 1 SMA-K antenna interface » Built-in port isolation and protection to meet field application requirements » Supports a wide DC 9V–60V power supply with dual-power redundancy » Supports industrial-grade wide-temperature operation from –40°C to 80°C » Supports standard DIN rail mounting
PWM-6012 Series Industrial-Grade Wireless Data Acquisition Module, supporting 8 isolated digital inputs, 4 optocoupler relay outputs, 1 RS485 serial port, and WIFI/LoRa wireless communication.

PWM-6012 Series Industrial-Grade Wireless Data Acquisition Module, supporting 8 isolated digital inputs, 4 optocoupler relay outputs, 1 RS485 serial port, and WIFI/LoRa wireless communication.

» Supports 8 isolated digital inputs » Supports 4 optocoupler-based relay digital outputs » Supports 1 opto-isolated RS485 communication interface » Supports the Modbus communication protocol » Supports Wi-Fi local wireless communication » Supports LoRa local wireless communication » 1 SMA-K antenna interface » Built-in port isolation and protection to meet field application requirements » Supports a wide DC 9V–60V power supply with dual-power redundancy » Supports industrial-grade wide-temperature operation from –40°C to 80°C » Supports standard DIN rail mounting
×

PWM-6011 Series Industrial-Grade Wireless Data Acquisition Module, supporting 12 optocoupler relay outputs, 1 RS485 serial port, and WIFI/LoRa wireless communication.

» Supports 12 optocoupler relay digital outputs » Supports 1 opto-isolated RS485 communication interface » Supports Modbus communication protocol » Supports local Wi-Fi wireless communication » Supports local LoRa wireless communication » 1 SMA-K antenna interface » Built-in port isolation and protection to meet field application requirements » Supports wide-range DC 9V–60V power supply with dual-power redundancy » Supports industrial-grade wide-temperature operation from –40°C to 80°C » Supports standard DIN rail mounting
PWM-6011 Series Industrial-Grade Wireless Data Acquisition Module, supporting 12 optocoupler relay outputs, 1 RS485 serial port, and WIFI/LoRa wireless communication.

PWM-6011 Series Industrial-Grade Wireless Data Acquisition Module, supporting 12 optocoupler relay outputs, 1 RS485 serial port, and WIFI/LoRa wireless communication.

» Supports 12 optocoupler relay digital outputs » Supports 1 opto-isolated RS485 communication interface » Supports Modbus communication protocol » Supports local Wi-Fi wireless communication » Supports local LoRa wireless communication » 1 SMA-K antenna interface » Built-in port isolation and protection to meet field application requirements » Supports wide-range DC 9V–60V power supply with dual-power redundancy » Supports industrial-grade wide-temperature operation from –40°C to 80°C » Supports standard DIN rail mounting
×

PWM-6010 Series Industrial-Grade Wireless Data Acquisition Module, supporting 12 isolated digital inputs, 1 RS485 serial port, and WIFI/LoRa wireless communication.

» Supports 12 isolated digital inputs » Supports dry-contact and wet-contact signals » Supports one opto-isolated RS485 communication interface » Supports the Modbus communication protocol » Supports local Wi-Fi wireless communication » Supports local LoRa wireless communication » One SMA-K antenna interface » Built-in port isolation and protection to meet field application requirements » Supports a wide input voltage range of DC 9V to 60V with dual-power redundancy » Supports industrial-grade wide-temperature operation from -40°C to 80°C » Supports standard DIN rail mounting
PWM-6010 Series Industrial-Grade Wireless Data Acquisition Module, supporting 12 isolated digital inputs, 1 RS485 serial port, and WIFI/LoRa wireless communication.

PWM-6010 Series Industrial-Grade Wireless Data Acquisition Module, supporting 12 isolated digital inputs, 1 RS485 serial port, and WIFI/LoRa wireless communication.

» Supports 12 isolated digital inputs » Supports dry-contact and wet-contact signals » Supports one opto-isolated RS485 communication interface » Supports the Modbus communication protocol » Supports local Wi-Fi wireless communication » Supports local LoRa wireless communication » One SMA-K antenna interface » Built-in port isolation and protection to meet field application requirements » Supports a wide input voltage range of DC 9V to 60V with dual-power redundancy » Supports industrial-grade wide-temperature operation from -40°C to 80°C » Supports standard DIN rail mounting
×

PWK-3260 Series Industrial-Grade IEEE 802.11ax (Wi-Fi 6) High-Power Dual-Band Dual-Channel Wireless AP/Bridge/Client, with 2 LAN ports, 4 serial ports, 2 DI inputs, and 1 DO output.

» Supports IEEE 802.11ax (Wi-Fi 6) standard » Two 10/100 Mbps adaptive LAN ports » Four opto-isolated RS232/485 serial ports » Two digital inputs and one digital output » Supports 2.4 GHz and 5 GHz communication bands » Supports data transmission rates of up to 2.4 Gbps » Supports MU-MIMO technology for multi-terminal channel sharing » Enables higher concurrent user capacity and greater per-user bandwidth » Supports dual redundant power inputs » High-power signal provides wider coverage » Supports SMA dual-antenna interface » Built-in temperature sensor ensures system reliability » Supports industrial-grade wide-temperature operation from -40°C to 80°C
PWK-3260 Series Industrial-Grade IEEE 802.11ax (Wi-Fi 6) High-Power Dual-Band Dual-Channel Wireless AP/Bridge/Client, with 2 LAN ports, 4 serial ports, 2 DI inputs, and 1 DO output.

PWK-3260 Series Industrial-Grade IEEE 802.11ax (Wi-Fi 6) High-Power Dual-Band Dual-Channel Wireless AP/Bridge/Client, with 2 LAN ports, 4 serial ports, 2 DI inputs, and 1 DO output.

» Supports IEEE 802.11ax (Wi-Fi 6) standard » Two 10/100 Mbps adaptive LAN ports » Four opto-isolated RS232/485 serial ports » Two digital inputs and one digital output » Supports 2.4 GHz and 5 GHz communication bands » Supports data transmission rates of up to 2.4 Gbps » Supports MU-MIMO technology for multi-terminal channel sharing » Enables higher concurrent user capacity and greater per-user bandwidth » Supports dual redundant power inputs » High-power signal provides wider coverage » Supports SMA dual-antenna interface » Built-in temperature sensor ensures system reliability » Supports industrial-grade wide-temperature operation from -40°C to 80°C
×

PWK-3100 Series IEEE 802.11 b/g/n Industrial-grade Single-band Single-channel Wireless AP/Bridge/Client, with 4 LAN ports, 1 WAN port, 1 serial port, 2 DI inputs, and 1 DO output.

» Supports IEEE 802.11 b/g/n standards » Four 10/100 Mbps adaptive LAN ports » One 10/100 Mbps adaptive WAN port » One opto-isolated RS232/485 serial port » Two DI inputs and one DO output » Supports QoS and VLAN for efficient network communication » Supports data transmission rates of up to 300 Mbps » MIMO technology enhances data throughput and signal coverage » Supports dual redundant power inputs » Supports SMA antenna interfaces » Built-in temperature sensor ensures system reliability » Supports industrial-grade wide-temperature operation from -40°C to 80°C
PWK-3100 Series IEEE 802.11 b/g/n Industrial-grade Single-band Single-channel Wireless AP/Bridge/Client, with 4 LAN ports, 1 WAN port, 1 serial port, 2 DI inputs, and 1 DO output.

PWK-3100 Series IEEE 802.11 b/g/n Industrial-grade Single-band Single-channel Wireless AP/Bridge/Client, with 4 LAN ports, 1 WAN port, 1 serial port, 2 DI inputs, and 1 DO output.

» Supports IEEE 802.11 b/g/n standards » Four 10/100 Mbps adaptive LAN ports » One 10/100 Mbps adaptive WAN port » One opto-isolated RS232/485 serial port » Two DI inputs and one DO output » Supports QoS and VLAN for efficient network communication » Supports data transmission rates of up to 300 Mbps » MIMO technology enhances data throughput and signal coverage » Supports dual redundant power inputs » Supports SMA antenna interfaces » Built-in temperature sensor ensures system reliability » Supports industrial-grade wide-temperature operation from -40°C to 80°C
×

PW-320-W series Wi-Fi industrial-grade wireless embedded computer, 400 MHz clock speed, 1 Ethernet port, 4 serial ports, DI and DO.

» Industrial-grade embedded microprocessor with a 400 MHz clock speed » 128 MB DDR2 SDRAM, 256 MB Flash » Supports high-speed Wi-Fi wireless data transmission » One 100 Mbps industrial Ethernet interface » Four opto-isolated RS232/485 serial ports » One DI and one DO » One SMA-K antenna interface » Built-in real-time clock (RTC) and buzzer » Built-in temperature sensor and hardware encryption » Pre-installed embedded Linux operating system » Supports industrial-grade wide-temperature operation from -40°C to 80°C
PW-320-W series Wi-Fi industrial-grade wireless embedded computer, 400 MHz clock speed, 1 Ethernet port, 4 serial ports, DI and DO.

PW-320-W series Wi-Fi industrial-grade wireless embedded computer, 400 MHz clock speed, 1 Ethernet port, 4 serial ports, DI and DO.

» Industrial-grade embedded microprocessor with a 400 MHz clock speed » 128 MB DDR2 SDRAM, 256 MB Flash » Supports high-speed Wi-Fi wireless data transmission » One 100 Mbps industrial Ethernet interface » Four opto-isolated RS232/485 serial ports » One DI and one DO » One SMA-K antenna interface » Built-in real-time clock (RTC) and buzzer » Built-in temperature sensor and hardware encryption » Pre-installed embedded Linux operating system » Supports industrial-grade wide-temperature operation from -40°C to 80°C
×

PW-320-SF Series 4G Seven-Band All-Network Industrial-Grade Wireless Embedded Computer, 300 MHz clock speed, 1 Ethernet port, 4 serial ports, and 1 DO.

» Industrial-grade embedded microprocessor with a 300 MHz clock speed » 64 MB DDR2 SDRAM, 256 MB Flash » Supports 4G seven-mode, all-network-compatible, high-speed remote data transmission » 1 100 Mbps industrial Ethernet interface » 4 RS232/485 opto-isolated serial interfaces » 1 DO output » 1 SMA-K antenna interface » 1 slide-out SIM card slot » Built-in buzzer » Built-in temperature sensor and hardware encryption » Pre-installed embedded Linux operating system » Supports industrial-grade wide-temperature operation from -40°C to 80°C
PW-320-SF Series 4G Seven-Band All-Network Industrial-Grade Wireless Embedded Computer, 300 MHz clock speed, 1 Ethernet port, 4 serial ports, and 1 DO.

PW-320-SF Series 4G Seven-Band All-Network Industrial-Grade Wireless Embedded Computer, 300 MHz clock speed, 1 Ethernet port, 4 serial ports, and 1 DO.

» Industrial-grade embedded microprocessor with a 300 MHz clock speed » 64 MB DDR2 SDRAM, 256 MB Flash » Supports 4G seven-mode, all-network-compatible, high-speed remote data transmission » 1 100 Mbps industrial Ethernet interface » 4 RS232/485 opto-isolated serial interfaces » 1 DO output » 1 SMA-K antenna interface » 1 slide-out SIM card slot » Built-in buzzer » Built-in temperature sensor and hardware encryption » Pre-installed embedded Linux operating system » Supports industrial-grade wide-temperature operation from -40°C to 80°C
×

PW-320-R Series LoRa Industrial-Grade Wireless Embedded Computer: 400 MHz main frequency, 1 Ethernet port, 4 serial ports, DI and DO.

» Industrial-grade embedded microprocessor with a 400 MHz clock speed » 128 MB DDR2 SDRAM, 256 MB Flash » Supports LoRa local wireless data transmission » One 100 Mbps industrial Ethernet interface » Four opto-isolated RS232/485 serial ports » One DI and one DO » One SMA-K antenna interface » Built-in real-time clock (RTC) and buzzer » Built-in temperature sensor and hardware encryption » Pre-installed embedded Linux » Supports industrial-grade wide-temperature operation from -40°C to 80°C
PW-320-R Series LoRa Industrial-Grade Wireless Embedded Computer: 400 MHz main frequency, 1 Ethernet port, 4 serial ports, DI and DO.

PW-320-R Series LoRa Industrial-Grade Wireless Embedded Computer: 400 MHz main frequency, 1 Ethernet port, 4 serial ports, DI and DO.

» Industrial-grade embedded microprocessor with a 400 MHz clock speed » 128 MB DDR2 SDRAM, 256 MB Flash » Supports LoRa local wireless data transmission » One 100 Mbps industrial Ethernet interface » Four opto-isolated RS232/485 serial ports » One DI and one DO » One SMA-K antenna interface » Built-in real-time clock (RTC) and buzzer » Built-in temperature sensor and hardware encryption » Pre-installed embedded Linux » Supports industrial-grade wide-temperature operation from -40°C to 80°C
×

PW-320-F Series 4G Seven-Band All-Network Industrial-Grade Wireless Embedded Computer

» Industrial-grade embedded microprocessor with a 400 MHz clock speed » 128 MB DDR2 SDRAM, 256 MB Flash » Supports 4G multi-mode, all-network-compatible, high-speed remote data transmission » 1 × 100 Mbps industrial Ethernet interface » 4 × RS485 opto-isolated serial interfaces » 1 × DI and 1 × DO interface » 1 × SMA-K antenna interface » 1 × slide-out SIM card slot » Built-in real-time clock (RTC) and buzzer » Built-in temperature sensor and hardware encryption » Pre-installed embedded Linux » Supports industrial-grade wide-temperature operation from -40°C to 80°C
PW-320-F Series 4G Seven-Band All-Network Industrial-Grade Wireless Embedded Computer

PW-320-F Series 4G Seven-Band All-Network Industrial-Grade Wireless Embedded Computer

» Industrial-grade embedded microprocessor with a 400 MHz clock speed » 128 MB DDR2 SDRAM, 256 MB Flash » Supports 4G multi-mode, all-network-compatible, high-speed remote data transmission » 1 × 100 Mbps industrial Ethernet interface » 4 × RS485 opto-isolated serial interfaces » 1 × DI and 1 × DO interface » 1 × SMA-K antenna interface » 1 × slide-out SIM card slot » Built-in real-time clock (RTC) and buzzer » Built-in temperature sensor and hardware encryption » Pre-installed embedded Linux » Supports industrial-grade wide-temperature operation from -40°C to 80°C
×

PIA-540 Series: Quad-core, 1.2 GHz high-performance rack-mounted embedded computer supporting two Ethernet ports, four serial ports, multiple DIO channels, and wireless communication via Wi-Fi, LoRa, and 4G, with SD card storage expansion.

» Industrial-grade quad-core processor with a 1.2 GHz clock speed » 1 GB DDR3 SDRAM, 8 GB Flash storage » Two 100 Mbps/1 Gbps industrial Ethernet interfaces » Four RS232/485 serial interfaces » Supports two digital inputs (DI) and one digital output (DO) » Supports local wireless communication via Wi-Fi and LoRa » Supports 4G remote communication » Built-in SD card expansion slot » Built-in real-time clock (RTC) and buzzer » Built-in temperature sensor and hardware encryption » Supports SMA-K dual-antenna interface » Built-in temperature sensor ensures system reliability » Pre-installed embedded Linux operating system » Supports industrial-grade wide-temperature operation from -40°C to 80°C
PIA-540 Series: Quad-core, 1.2 GHz high-performance rack-mounted embedded computer supporting two Ethernet ports, four serial ports, multiple DIO channels, and wireless communication via Wi-Fi, LoRa, and 4G, with SD card storage expansion.

PIA-540 Series: Quad-core, 1.2 GHz high-performance rack-mounted embedded computer supporting two Ethernet ports, four serial ports, multiple DIO channels, and wireless communication via Wi-Fi, LoRa, and 4G, with SD card storage expansion.

» Industrial-grade quad-core processor with a 1.2 GHz clock speed » 1 GB DDR3 SDRAM, 8 GB Flash storage » Two 100 Mbps/1 Gbps industrial Ethernet interfaces » Four RS232/485 serial interfaces » Supports two digital inputs (DI) and one digital output (DO) » Supports local wireless communication via Wi-Fi and LoRa » Supports 4G remote communication » Built-in SD card expansion slot » Built-in real-time clock (RTC) and buzzer » Built-in temperature sensor and hardware encryption » Supports SMA-K dual-antenna interface » Built-in temperature sensor ensures system reliability » Pre-installed embedded Linux operating system » Supports industrial-grade wide-temperature operation from -40°C to 80°C
×

PIA-340 Series 400 MHz DIN-rail-mounted industrial-grade embedded computer, supporting 2 Ethernet ports, 2 serial interfaces, and 1 dual-band Wi-Fi wireless communication interface.

» Industrial-grade embedded processor with a 400 MHz clock speed » 128 MB DDR2 SDRAM » 256 MB NAND Flash » Two 100 Mbps industrial Ethernet interfaces » Two opto-isolated RS485 serial interfaces » One dual-band Wi-Fi wireless communication interface » Built-in real-time clock (RTC) » Built-in temperature sensor and hardware encryption » Built-in buzzer » Pre-installed embedded Linux operating system » Supports industrial-grade wide-temperature operation from -40°C to 80°C
PIA-340 Series 400 MHz DIN-rail-mounted industrial-grade embedded computer, supporting 2 Ethernet ports, 2 serial interfaces, and 1 dual-band Wi-Fi wireless communication interface.

PIA-340 Series 400 MHz DIN-rail-mounted industrial-grade embedded computer, supporting 2 Ethernet ports, 2 serial interfaces, and 1 dual-band Wi-Fi wireless communication interface.

» Industrial-grade embedded processor with a 400 MHz clock speed » 128 MB DDR2 SDRAM » 256 MB NAND Flash » Two 100 Mbps industrial Ethernet interfaces » Two opto-isolated RS485 serial interfaces » One dual-band Wi-Fi wireless communication interface » Built-in real-time clock (RTC) » Built-in temperature sensor and hardware encryption » Built-in buzzer » Pre-installed embedded Linux operating system » Supports industrial-grade wide-temperature operation from -40°C to 80°C
×

JH-1000-5BD 100 Mbps 5-Port Industrial Ethernet Switch

A 1-port 100 Mbps uplink electrical port plus 4-port 100 Mbps downlink electrical ports industrial-grade Ethernet switch, supporting 1 10/100Base-TX uplink port and 4 10Base-T/100Base-TX downlink ports. The product complies with FCC, CE, and RoHS standards. The JH-1000-5BD switch operates within a temperature range of -40°C to 80°C and features exceptional ruggedness, making it suitable for a wide range of harsh environments; it can also be conveniently installed in compact control cabinets. Its DIN-rail mounting capability, wide operating temperature range, IP40-rated enclosure, and LED indicators make the JH-1000-5BD a plug-and-play industrial-grade device, providing a reliable and convenient solution for networking users’ Ethernet equipment.
JH-1000-5BD 100 Mbps 5-Port Industrial Ethernet Switch

JH-1000-5BD 100 Mbps 5-Port Industrial Ethernet Switch

A 1-port 100 Mbps uplink electrical port plus 4-port 100 Mbps downlink electrical ports industrial-grade Ethernet switch, supporting 1 10/100Base-TX uplink port and 4 10Base-T/100Base-TX downlink ports. The product complies with FCC, CE, and RoHS standards. The JH-1000-5BD switch operates within a temperature range of -40°C to 80°C and features exceptional ruggedness, making it suitable for a wide range of harsh environments; it can also be conveniently installed in compact control cabinets. Its DIN-rail mounting capability, wide operating temperature range, IP40-rated enclosure, and LED indicators make the JH-1000-5BD a plug-and-play industrial-grade device, providing a reliable and convenient solution for networking users’ Ethernet equipment.
×

CH-6100 Series Wall-Mounted Industrial-Grade Serial Device Networking Server, with 1/2 Ethernet ports and 2/4 opto-isolated RS232/422/485 serial ports.

» Wall-mounted or DIN-rail mounting; compact size; robust and durable » One 10/100 Mbps industrial Ethernet port » Supports socket-based operation modes, including TCP Server, TCP Client, and UDP » Two or four serial ports, with support for RS232/RS422/RS485 » Supports SNMP and MIB network management functions » Built-in temperature sensor for ambient temperature monitoring » Built-in RTC with backup battery » All ports feature built-in 15 kV ESD protection » Supports industrial-grade wide-temperature operation from -40°C to 80°C
CH-6100 Series Wall-Mounted Industrial-Grade Serial Device Networking Server, with 1/2 Ethernet ports and 2/4 opto-isolated RS232/422/485 serial ports.

CH-6100 Series Wall-Mounted Industrial-Grade Serial Device Networking Server, with 1/2 Ethernet ports and 2/4 opto-isolated RS232/422/485 serial ports.

» Wall-mounted or DIN-rail mounting; compact size; robust and durable » One 10/100 Mbps industrial Ethernet port » Supports socket-based operation modes, including TCP Server, TCP Client, and UDP » Two or four serial ports, with support for RS232/RS422/RS485 » Supports SNMP and MIB network management functions » Built-in temperature sensor for ambient temperature monitoring » Built-in RTC with backup battery » All ports feature built-in 15 kV ESD protection » Supports industrial-grade wide-temperature operation from -40°C to 80°C